Instruction manual

Chapter 9 Print (Page Setup)
9・3
Content
If you want to print the title, select "Attach," and if you don't want to print the title,
select "None." Assign the file name if you select "Attach." ※
For each page, select "Attach/None" (as explained above) in printing the header.
Assign the
file name if you select "Attach." ※
For each page, select
"Attach/None" (as explained above) in printing the footer.
Assign the file name if you select "Attach." ※
Assign whether you want to add or not add the symbol /comment to the coil, and
select the printing position (bottom /right) of the comment.
Assign whether you want to add or not add the symbol/comment to the contact.
Select
"Attach/None" in adding the cross reference.
Select
"Attach/None" in adding the program address.
Setup spaces of top/bottom/left/right sides.
Start-up "HF Editor" that creates title, header and footer.
Setup items
Title
Header
Footer
Coil
Contact
Cross Reference
Program Address
Margins
Boot HF Editor
Zoom In/Out Zoom in or out ladder image to be printed.
・You can select the rate from 50/75/100/150/200%.
Right Character
Position Offset
Max. No. of
String
Setup the maximum character numbers when you add symbol/comment to the coil /contact.
The setup area for the symbol is 0 to 16 characters, and for the comment it is 0 to 28 characters.
Specify offset of position of right character such as cross reference or coil
comment.
※ By clicking [Reference] (number ① above) of each item, you can assign the file name by [Select
File] dialog box (next page) at the title/header/footer.
①
②
③
9-1 Page Setup (Program/System/Data/Symbol/Parameter/Option Parameter/Data List)
Setup the format of the page for printing.
If you click [Page Setup] by the [File] (page 9-1) menu of each window, the dialog box of each setup
will be displayed.
[1] Setup Page of Program
：：
：：
：Ladder
If you click [Page Setup] by the [File] menu of [Program : Ladder] window, the [Ladder Print] dialog
box will be displayed.