Instruction manual

8・26
Chapter 8 Monitor (Edit Program while Monitoring)
[2] Edit Circuit
・You can change, insert (add), delete the program (ladder circuit) of the PC during the ladder
monitoring.
●●
●●
● Operation order
1. Activate the [Program：Ladder] window
2. Read program memory from the PC by the [PC Transfer]-[Read] command.
You can also write program created at JW-100SP to the program memory of the PC by
the [PC Transfer]-[Write] command.
3. Execute ladder monitor by the [Monitor]-[Start Monitoring] command.
4. In case of changing the circuit → (1) Change circuit (to the following heads)
In case of inserting the circuit → (2) Insert circuit (to the page 8-28)
In case of deleting the circuit → (3) Delete circuit (to the page 8-30)
(1) Change circuit
You can modify the assigned circuit (network). (You can modify several continuous circuits in
batch.)
5. Select the line number of the circuit that is to be changed.
6. Click [Monitor]-[Edit Circuit]-[Change].
⇒ The [Edit Circuit (change)] window will be opened, and the selected ladder circuit will be
displayed.
Toolbar for
Editing Ladder
Main Toolbar
Menu Bar
Message Bar
Status Bar