Instruction manual

8・21
Chapter 8 Monitor (Sampling Trace)
↓
To the next page
■■
■■
■ [Setup] menu
Item
Model Change
Setup the Trace
condition
Trace Memory File
Content
To set up sampling trace, click [Setup the Trace condition]. The [Setup] dialog
box will be displayed.
Setup item
Content
Select the file register number to save the sampled data.
Use file F (2KB) in normal use.
Trace Memory
Capacity
Define the capacity (KB) to use as trace memory from
specified file register. The capacity is always 2KB when
you use file F.
Setup Sampling
Cycle
Define sampling frequency.
You can select [Every cycle] or [0 to 1000ms] in 10ms steps.
Trigger Mode
Select the trigger mode in sampling start.
Select the PC model name to execute sampling trace.
・If you start by selecting [Tool]-[Sampling Trace] or [Send]-[Sampling Trace] in
JW-100SP, you cannot change the model.
(It will be the model in operation with JW-100SP.)
・Setup contents are all deleted.