Instruction manual

8・17
Chapter 8 Monitor (Sampling Trace)
4
. .
. .
. Setup of trace condition
Set up trace memory file, trace memory capacity, sampling frequency, and trigger mode by
selecting [Setup]-[Trace Condition Setup].
5
. .
. .
. Setup of trace data
Register the address to be traced in the input module of trace data address.
●●
●●
● Input of trace data address
If you select an address input cell and push the [Enter] key, if you double-click a cell, or if you right-
click a cell and select [Input/modify] in the popup menu, the [Input Address] dialog box will be
displayed.
Input the address to be traced in the [Address] area in the [Input Address] dialog box.
If you click ▼ on the right of the [Address] area, you can select a register address in the list.
●●
●●
● Deleting trace data address
To delete the address, select the cell containing the address you want to delete and push the
[Delete] key, or right-click the cell and select [Delete] in the popup menu.
Address input cell