Instruction manual

8・15
Chapter 8 Monitor (Sampling Trace)
※ 1 Data at the previous position of the trace data cursor
※ 2 Data at the position of the trace data cursor
※ 3 Data at the next position of the trace data cursor
You can change the display type of ※ 1 to ※ 3 to binary notation/octal notation/
decimal notation/hexadecimal notation.
※ 4 Situation at the position of the trace data cursor
・Relay: Display for ON, for OFF.
・Register: Display data in hexadecimal notation (fixed).
8-3 Sampling Trace
If you click [Monitor]-[Sampling Trace] (refer to page 8-20) according to the procedure of sampling trace
on the next page, sampling trace will start.
(Display example)
Trigger condition
Trace data address
Trace data cursor
Sampling trace displays data in PC (e.g. ON/OFF information of relay) in the form of time charts. You
can also save or print the displayed data.
※ 1 ※ 2
※ 3※ 4