Instruction manual

8・9
Chapter 8 Monitor (Multipoints Monitor)
Content
Change the display type of the register, and set/reset the timer /counter
contact.
●Changing the display type of the register
Right-click the cell of the register address, and select the display type in
the short cut menu. The numerical value of the data cell of the register
address is displayed in the specified display form.
・You can select the display type of the system memory from binary
notation/octal notation/decimal notation/decimal notation (with a
plus/minus sign)/hexadecimal notation, or ASCII.
●Set/reset of the timer /counter contact
If you right-click the cell monitoring the timer counter, the short cut menu
that carries set/reset as their items will be displayed. If you select set/reset
in this menu, you can set/reset the timer /counter.
Item
Supplement
Symbol
Comment
Displayed when the symbol/comment is setup at the register data.
・Sample Operation 1 (To send from the data memory window to multipoints monitor)
If you right-click the address to be monitored in the Data Memory window of JW-100SP and
select [Send]-[Multipoints Monitor], the address will be displayed in the multipoints monitor.