Instruction manual

Chapter 8 Monitor (Start Monitoring, Stop Monitoring)
8・5
[4] Monitor at the [Data] window
●●
●●
● Monitor data memory
Data items are renewed by communicating with the PC, and following the assigned monitor type.
●●
●●
● Modify current value of the register
If you double-click the cell whose register is being monitored, or select the cell and push the
[Enter] key, the item will become the input mode. If you input the [Enter] key after inputting an
optional numerical value at the input mode, the data memory value of the PC will be modified.
●●
●●
● Set/reset of the timer/counter
if you click on the right side of the mouse on the line monitoring the timer・counter, the short cut
menu that carries set/reset as their items will be displayed. If you select set/reset by this menu, you
can set/reset the timer・counter.
●●
●●
● Set/reset of the relay
If you click on the right side of the mouse on the line monitoring the relay, the short cut menu that
carries set/reset as their items will be displayed. If you select set/reset by this menu, you can set/
reset the relay.
●●
●●
● Select display type
If you use the [Display] menu or the toolbar for editing data, you can select the display type of the
system memory from binary notation/octal notation/decimal notation/decimal notation (with a plus/
minus sign)/hexadecimal notation, or ASCII.
●●
●●
● Select data length
If you use the [Display] menu or the toolbar for editing data, you can select the data length of the
data memory in byte/word/double word. This selection is all valid in the display area of the data
memory.
●●
●●
● Displays as a list, Displays in detail
If you use the [Display] menu or the toolbar for editing data, you can select either summary display
(display several data in one row) or detail display (display one data and its symbol/comment in
one row.)
● Edit operation
You can cut/copy/paste the selected area by the [Edit] menu , or by the shortcut menu which is
displayed by clicking the right side of the mouse.
・By the operations described above at the time of the monitor, connected value of the main PC will be
modified at the same time.
Notes