Instruction manual

8・4
Chapter 8 Monitor (Start Monitoring, Stop Monitoring)
[3] Monitor at the [System] window
●●
●●
● Monitor system memory
Data items are renewed by communicating with the PC, and following the assigned monitor type.
●●
●●
● Modify system memory
If you double-click the data cell, or select the cell and push the [Enter] key, the item will become
the input mode. If you input the [Enter] key after inputting an optional numerical value at the input
mode, the system memory value of the PC will be modified.
●●
●●
● Select display type
If you use the [Display] menu or the toolbar for editing data, you can select the display type of the
system memory from binary notation/octal notation/decimal notation/hexa decimal notation, or
ASCII. This selection is all valid in the display area of the system memory.
●●
●●
● Select data length
If you use the [Display] menu or the toolbar for editing data, you can select the data length of the
system memory from byte/word/double word. This selection is all valid in the display area of the
system memory.
●●
●●
● Displays as a list, Displays in detail
If you use the [Display] menu or the toolbar for editing data, you can select either summary display
(display several data in one row) or detail display (display one data and its comment in one row.)
●●
●●
● Edit operation
You can cut/copy/paste the selected area by the [Edit] menu , or by the shortcut menu which is
displayed by clicking the right side of the mouse.
・By the operations described above at the time of the monitor, the value of the connected PC will be
modified at the same time.
Notes