Instruction manual

8・2
Chapter 8 Monitor (Start Monitoring, Stop Monitoring)
(2) Set/ reset of the relay
Set/reset the relay of the cursor position.
●●
●●
● Operation method
① Move the cursor to the relay where you are going to set/ reset.
② Click the right side of the mouse.
⇒ The "set/ reset relay" menu will be displayed.
・If you click [Sets relay] or [Resets relay], the relay of the cursor position will be set/ reset.
・Before monitoring, read the program from the PC by the PC transfer (Refer to the page 5-59) or
write the program to the PC. If the program of both the PC and the personal computer is differ-
ent, you can not monitor the right calculation.
Notes