Instruction manual

Chapter 8 Monitor (Start Monitoring, Stop Monitoring)
8・1
By connecting the PC and the personal computer, you can monitor the ON/OFF condition of the relay, or
monitor the current value of the register. Before monitoring, execute the "communication setup" first. (Refer
to the page 5-48)
If you click [Monitor] of the menu bar at the main/program/system/data/parameter window, the [Monitor]
menu summary will be displayed.
8-1 Start Monitoring, Stop Monitoring (Program/System/Data/Parameter)
Start/stop the monitor of the active window.
・Only start/stop the monitor of the active window, and it does not affect to the other window.
[1] Monitor at the [Program :Ladder] window
The [Program : Ladder] window is organized by the line number (address number) and the display
area of the ladder.
(1) Monitor Display
●●
●●
● Display relay/coils
When the circuit is running, a thick line is displayed, and when the circuit is not running, a thin line
is displayed.
●●
●●
● Display application instruction
Display the monitor by the monitor display type and the register display type that were setup at the
[Setup Monitor Display Mode] dialog box.
Chapter 8
Monitor
・In the [Main] window, you can select
[I/O Forced Processing] only.
Input line
Current Value
Notation Display
Display Content
When the input of the application instruction is running, a thick line is
displayed, and when the circuit is not running, a thin line is displayed.
The current value of the register by the notation type of the setup at the
register display type will be displayed at the top of register.
When the setup of the monitor display type is the detail display, the notation
of the current value will be displayed.
(Simple display)
・Display example
Running Condition
(Detail display)
Not Running Condition
Current
value
Notation of
the current
value
(Details in pages)
8-1
8-24
8-26
← Only the [Program : Ladder] window
8-1