Instruction manual

7・6

Chapter 7 Setup Each Data (Setup Symbol/Comment)

7-3 Setup Symbol/Comment

■ Summary Display/Operation of Symbol/Comment

At the symbol・comment window, the address/symbol/comment of the data memory will be

displayed.

・Select relay, timer/counter, register, file register by the tree of the tree bar. In addition, select the

…

99000, E0000) at the register, and select flie area

(FILE 1, FILE 2

…

) at the file register.

・To input or edit the symbol or comment, locate the area with the scroll bar, click the data cell,

push the [Enter] key, and input the characters.

・

You can register maximum symbols at 16 characters, and maximum comments at 28 characters.

・Up to maximum 32000 symbol/comment s can be registered.

・If you setup "Input symbol check is done" at the [Setup]-[Check Input's Same Symbol] of the

menu bar, the confirmation dialog box will be displayed at the time of inputting the same symbol.

・You can select one cell with single click.

・You can select several cells with drag.

・You can cut /copy /paste the selected area by the [Edit] menu , or by the shortcut menu which is

displayed by clicking the right of the mouse.

(PC model : JW-33CUH1 display)

Address chart

Comment chart

Symbol chart

Tree