Instruction manual

Chapter 7 Setup Each Data (Setup Data Memory)

7・5

7-2 Setup Data Memory

■■

■ Summary Display/Operation of Data Memory

At the data memory window, the address/data/symbol/comment of the data memory will be

displayed.

・Select relay, timer /counter, register, file register by the tree of the tree bar. In addition, select the

…

99000, E0000) at the register, and select file area

(FILE 1, FILE 2

…

) at the file register.

・To edit the data, locate the area with the scroll bar, and click the data cell. If you want to edit the

・During the monitoring (PC on-line), the memory volume of the PC will be displayed.

・At the symbol chart or the comment chart, the data memory that was registered at the [Symbol]

window will be displayed. You can also input characters directly in the symbol chart or the

comment chart.

(1) Operation at the data memory display area

・You can select one cell with single click.

・You can select several cells with drag.

・You can cut/copy/paste the selected area by the [Edit] menu, or by the shortcut menu which is

displayed by clicking the right of the mouse.

(2) Select operation of display

You can operate the following using the [View] menu or the toolbar for editing data.

・Select data display of the data memory from binary notation/octal notation/decimal notation/

decimal notation (with +-)/ hexadecimal notation, or ASCII.

・Select the data length of the data memory from byte/word/double word. This selection is all valid

in the display area of the system memory

・Select either display as a list (display several data in one line) or display in detail (display one

data and its symbol/comment in one line.)

(PC model : JW-33CUH1 display)

Address chart

Data chart

Comment chart

Symbol chart

Tree