Instruction manual

7・1
Chapter 7 Setup Each Data (Setup System Memory)
Chapter 7
7-1 Setup System Memory
■■
■■
■ Summary Display/Operation of the System Memory
At the system memory window, the address/data/comment of the system memory will be displayed.
・To edit the data, locate the area with the scroll bar, click the data cell, push the [Enter] key, and
input the numerical value.
・During the monitoring (PC on-line), the memory volume of the PC will be displayed.
・The comment will display the already setup content each time .
(1) Operation at the system memory display area
・You can select one cell with single click.
・You can select several cells with drag.
・You can cut/copy/paste the selected area by the [Edit] menu , or by the shortcut menu which is
displayed by clicking the right of the mouse.
(2) Select operation of display
You can operate the following using the [Display] menu or the toolbar for editing data.
・Select data display of the system memory from binary notation/octal notation/decimal notation
/hexadecimal notation, or ASCII.
・Select the data length of the system memory from byte/word/double word. This selection is all
valid in the display area of the system memory.
・Select either display as a list (display several data in one line) or display in detail (display one
data and its comment in one line.)
The setup of system memory,data memory,parameter,symbol/comment will be explained.
Setup Each Data
Address chart
Data chart
Comment chart