Instruction manual

6・42
Chapter 6 Program Edit (Mnemonic Programming)
6-2 Mnemonic programming
■■
■■
■ [Program : Mnemonic] window
If you click [Display]-[Change Display] of the menu bar when the [Program : Ladder] window is being
displayed, the [Program : Mnemonic] window will be displayed.
■■
■■
■ Input by Mnemonic
The input by the mnemonic is executed in the following order.
1. Select the program address that you want to input.
・Select the program address with [↑][↓] keys, or click by the mouse.
2. Select the instruction that you want to input.
・There are three methods to select the instruction.
① Select the [Instruction] menu command. (STR, AND, etc...)
② Click the toolbar for editing mnemonic.
③ Press the function key.
F2 : STR F3 : AND F4 : OR F5 : NOT
F6 : TMR F7 : CNT F8 : FUN F9 : OUT
・ The inputs of compound instructions (STR NOT, AND STR, STR TMR, OR NOT CNT,
etc...) will be executed by repeating the order described above.
・The symbol which was registered at the [Symbol] window (the same file name as the [Program :
Mnemonic] window) will be displayed.
Program address
Toolbar for editing mnemonic
Symbol
Mnemonic