Instruction manual

6・33
Chapter 6 Program Edit (Ladder Programming)
(1) Edit ladder circuit
The editing method of the ladder circuit at the [Read from Library] window is same as the [Register
library] window. Refer to the page 6-29.
(2) Setup increase /decrease value
The setup method of the increase /decrease value at the [Read from Library] window is same as
the [Register library] window. Refer to the pages 6-29 to 30.
(3) Save library file
●●
●●
●Save
To save the file with the same name as the library file that was read, click [File]-[Save] of the
menu bar.
●●
●●
●Save As
To save the file with the different name to the library file that was read, click [File]-[Save As] of the
menu bar.
⇒ [Register library file] dialog box will be displayed.
If you click [Save] button after setting up the place (directory) to save first, and then inputting the
file name, it will be saved in a file. (file of the extension lb2)
Also, the line comment file is also created at the same time. (file of the extension lbc)
(4) Read to the [Program : Ladder] window
Read the ladder circuit created at the [Read from Library] to the [Program : Ladder] window.
●●
●●
● Operation order
1. Click [Insert]-[Insert] of the menu bar.
⇒ [Insert Library] dialog box will be displayed.