Instruction manual

6・32
Chapter 6 Program Edit (Ladder Programming)
3. Click [File]-[Read] of the menu bar when reading out the library file that has already been saved.
⇒ [Read from library file] dialog box will be displayed.
4. Select the reading file name, and click [Open] button. Only file that you can read is the file with the
extension lb2.
⇒ The ladder circuit that has been saved in the library file will be displayed.
5. Like the [Program : Ladder] window, to modify the ladder circuit, use the button of the toolbar for
editing ladder, the command of the [Instruction] menu, and the function key.
・The library file that you can read is the file of a model that carries the same current library
window.
Notes