Instruction manual

6・21
Chapter 6 Program Edit (Ladder Programming)
(5) Insert instruction 2 (use [Insert Cell] command)
・If you use the [Insert Cell] command, you can delete several cells in the horizontal direction
(column direction) in batch.
・The cells on the right of the inserted position move right in the number of inserted cell columns.
●●
●●
● Operation order
1. Move the cell cursor to the cell where you insert the instruction.
2. If you are inserting several cells, simply drag them.
3. If you click [Edit]-[Insert Cell] of the menu bar, an empty cell will be inserted.
4. Write the inserting instruction to the inserted cell position.
(6) Insert instruction 3 (use the [Insert Row] command)
・If you use the [Insert Row] command, you can insert several rows in batch.
・It is useful for inserting the OR instruction.
・All lines below the inserted line will move down the same number of rows inserted.
●●
●●
● Operation order
1. Move the cell cursor to the line where you insert the instruction.
2. If you are inserting several cells, simply drag them.
3. If you click [Edit]-[Insert Row] of the menu bar, an empty line will be inserted.
4. Write the inserting instruction to the inserted cell position.