Instruction manual

6・20
Chapter 6 Program Edit (Ladder Programming)
(3) Delete instruction 2 (use the [Delete Cell] command)
・If you use the [Delete Cell] command, you can delete several cells in the horizontal direction
(column direction) in batch.
・The area where you have deleted the cells becomes blank.
●●
●●
● Operation order
1．Move the cell cursor to the cell that is to be deleted.
2．If you are deleting several cells, simply drag them.
3．If you click [Edit]-[Delete Cell] of the menu bar, the instruction cell will be deleted.
・In case of canceling the deletion, click [Edit]-[Undo] of the menu bar.
（（
（（
（4
））
））
）Insert instruction 1 (use insert mode)
・In the insert mode (refer to the page 6-18), you can inset another element on the cell where the
instruction (element) such as A or B contact exist already.
・There are two types of inserts: insert left and insert right.
◎◎
◎◎
◎ Insert Left
In the direct input mode, if you click the instruction cursor (A contact, B contact, horizontal line, F-
43, F-44, F-45) on the inserting cell , the new element will be inserted in this cell.
In the dialog input mode, if you click the instruction cursor (A contact, B contact, horizontal line, F-
43, F-44, F-45) on the inserting cell , the new element will be inserted in this cell.
◎◎
◎◎
◎ Insert Right
In the direct input mode, if you click the instruction cursor (A contact, B contact, horizontal line, F-
43, F-44, F-45) by keep pressing the [Shift] key on the inserting cell , the new element will be
inserted on the right side of the cell.
In the dialog input mode, you can not inset on the right.
insert
Insert
Insert mode