Instruction manual

6・19
Chapter 6 Program Edit (Ladder Programming)
(2) Delete instruction 1 ( button : eraser, or use the [Delete] key)
・ button (eraser) is used to delete the instruction by the cell module.
・It is useful for deleting the vertical line (OR line), etc.
●●
●●
● In case of direct input mode
1. If you click button, the cursor changes to the [Eraser] cursor.
2. If you click on the instruction that is to be deleted (the vertical line in the display above), the
instruction will be deleted.
●●
●●
● In case of dialog input mode
1. Move the cell cursor to the deleting cell.
2. If you click button, the instruction will be deleted. If the cell which is to be deleted contains
the vertical line (OR line) (in case of the example above), the [Delete instruction] dialog box
will be displayed.
3. In case you are deleting only the vertical line (OR line), select "OR Line," and [OK] button.
Then the vertical line (OR line) will be deleted.
・The instruction at the cell cursor position will also be deleted with the [Delete] key.
Delete vertical line
(OR line)
(Example 3) Modify the Fc210 (ADD) instruction to F-63 (INC) instruction
・In the direct input mode, the application instruction number, the register number and the
constant become the initial values, so that you need to modify them after the instruction input.