Instruction manual

5・73

Chapter 5 Menu Operation (Window)

5-8 Tool (Main/Program/Symbol/Data/System/Parameter)

・ Main/Program:Mnemonics/System/Data/Symbol/Parameter

・Program:Ladder

■ Library (Program:Ladder)

You can create the library, read the file, or save the file in the Library window.

■ Multipoints Monitor (Main/Program/Symbol/Data/System/Parameter)

In the [Multipoints Monitor] window, you can monitor any data of data memory or system memory.

For the detail of multipoints monitor, refer to "Chapter 8 Monitor".

■ Sampling Trace (Main/Program/Symbol/Data/System/Parameter)

In the [Sampling Trace] window, you can see ON/OFF information of PC or contents of the register

by time charts. For the detail of sampling trace, refer to "Chapter 8 Monitor".

■ Option Parameter (Main/Program/Symbol/Data/System/Parameter)

In the [Option Parameter] window, you can set up parameters of models that save the parameters in the

option modules. For the detail of option parameter, refer to "Chapter 7 Setup Each Data".

Item

Display Content

Read

If you click [Library]-[Read], the Library window will be displayed.

If you click [File]-[Read] in the Library window, the [Read Library

File] dialog box will be displayed. You can select and read the

file in this dialog box.

You can read files of models you set in the Library window.

The expansion of readable files is the same with that of the LB2

library files.

If you click [Library]-[Register] after selecting lines to be

registered in the Program:Ladder window, the Library windows

will be displayed with the selected lines copied. If you click [File]

-[Save As] in this window, the [Register Library Files] dialog box

will be displayed, and you can save file with an appropriate name.

For the detail of Library, refer to Chapter 6.

●●

●

Library