Instruction manual

5・65
Chapter 5 Menu Operation (PC)
[3] CU Memory Clear (whole model)
(1) Function
Initialize (clear) the memory of the connected PC, and activate I/O register .
However, this function is valid when the PC is stopping.
(2) Operation content
If you click [CU Memory Clear], the dialog box confirming the clear operation will be displayed.
・ If you click [OK], the clear operation will be executed.
●●
●●
●Secret OFF operation
When the PC is under the secret ON condition, you need to release the secret ON (secret OFF) to
do processing with the PC. Input the registered password when the following dialog box asking to
input the password for starting the communication with the PC is displayed.
If you input the password, the secret will be released, and it will remain under the secret OFF
condition until it will be activated (secret ON).
・If you forget the password, you will not be able to communicate with the PC as a whole. Write down
and keep the password somewhere safe.
Notes
Memory
Program Memory
Data Memory
System Memory
I/O register
Initialization Content
Clear
All 00
Initial value
On