Instruction manual

5・56
Chapter 5 Menu Operation (Setup)
・Select "Input Mode," "Serial Input of Address", "Double Click," "Widen /Narrow Application
Instruction’s Frame" at each check box.
(2) Operation content
If you click [Setup Input Type] by the [Setup] menu, [Setup Input Type] dialog box will be dis-
played.
■ Setup Display (Program : Ladder)
(1) Function
Assign the display position of the coil (OUT instruction), TMR /CNT instruction, application instruc-
tion.
・For the setup example, refer to the page 6-36.
Operation item
Operation Content
Assign the display position of the coil (OUT) instruction.
Specity
Position
Content
If the setup of 【align position】 of the next chart is "align left," the fourth
cell from the right of the screen will become the screen display position of
the coil. If it is "align right", the first cell from the right of the screen will
become the display position of the coil.
If the number of contacts of the horizontal direction are more than the
screen size, the display position of the coil will be decided according to
the number of contacts. (Coil display position will be set outside the
screen.)
Assign the display position of the coil with the row number (0 to 61).
If the number of contacts of the horizontal direction are more than the
screen size, the display position of the coil will be decided according to
the number of contacts.
Select item
Align Left
Align Right
Select item
Content
Set at the display position of coil (OUT instruction).
Set at the fourth position from the left of the display.
Assign the display position of TMR /CNT, application instruction number.
Align
Display Size
Align Position
Display Position
Character color Specify the color of symbol, comment (including line comments) or program address.