Instruction manual

Chapter 5 Menu Operation (Setup)
5・55
■■
■■
■ Setup Input Type (Program : Ladder)
(1) Function
Setup the input mode at the time of creating a program, serial input of address input, double click,
enlarge/contract of the application instruction frame.
・For more details, refer to the pages 6-4 to 17.
Operation Item
Operation Content
Select "direct input" or "dialog input."
Inputs Using
Dialog
Content
If you select the instruction from toolbar for editing ladder,
instruction menu, function key, the number of relay address
/register address /timer･counter address /application instruction will
be initialized, and then it will be written directly into the selected cell
position.
・It’s useful when inputting the relay address after writing the
drawing part of the ladder.
If you select the instruction from toolbar for editing ladder,
instruction menu, function key, the dialog box that inputs the relay
address /register address will be displayed.
・Instruction that does not require the input of address will not
display the dialog box, but it will be written onto the selected cell
position.
Select item
Do
Undo
Select item
Content
The next element will automatically be on the waiting list for inputting
address.
The next element will not automatically be on the waiting list for inputting
address.
Select the condition after the inputting the relay address /register address etc.
Select item (content)
Becomes Address Input.
Changes Instruction at Cell
Inputs at
Display Directly
Select the condition after double clicking at the instruction cell.
Select item (content)
Process with Row Data
Process Application Instruction only
For the application instruction frame of several instructions, select several operation
contents at the time of enlarge/contract of the display frame to the vertical direction.
Widen /Narrow
Application
Instruction’s
Frame
Double Click
Serial Input of
Address
Input Mode