Instruction manual

5・52
Chapter 5 Menu Operation (Setup)
Operation Item
Operation content
Time Out Times
Set up the duration of communication timeout between the modem and
JW-100SP. The timeout duration varies, depending on conditions of the
personal computer and the telephone line. Set it up according to the situation.
Telephone circuit
Select the type of your telephone line (pulse or tone).
Setup Network
If you connect a new modem, set up the modem itself first.
When you click the [Setup Modem] button, the [Modem setting] dialog box
will be displayed.
You need to set up the modem of both the PC and the personal computer.
Connect the modem to the personal computer with a straight cable of
RS-232C (usually attached to modem).
To set up the modem of the PC, select [PLC side]; to set up the modem of
the personal computer, select [Computer side] and click [Sending]. To set up
the modem optionally, select [Data sending].
Modem setting
Refer to "Network Connection."
④ Click [OK]
⇒ The setup is completed.