Instruction manual

5・38
Chapter 5 Menu Operation (Display)
■■
■■
■ Data List (Program)
(1) Function
Display/print the using-condition chart of the relay, timer･counter, register and label.
・The data list at the [Program : Ladder] window will be automatically changed to mnemonic
before the display. As a result, the circuit of the ladder program must be normal in order to
display the data list.
(Display example)
If you click [Display]-[Data List] by the menu bar of the [Program : Ladder]/ [Program : Mnemonic]
window, [Data List] dialog box will be displayed.
Content
Used address will display※(××). ×× of (××) describes the number of
addresses.
※××××× [−−−−] will be displayed.××××× describes the Program
address, and −−−− describes the network (circuit) number.
Item
Address
Display of ※
−
＊
T
C
Content
Use as Contact
Use as Coil
Use as Timer
Use as Counter
Display of※
＊
／
Content
Use as output
Use as B contact
Symbol
Comment
Displayed when the symbol/comment is registered at the address.
Cross reference
Note that the network number will not be displayed at the [Program :
Mnemonic] window.