Instruction manual

5・35
Chapter 5 Menu Operation (Display)
Content
Select the display type (simple display /detail display) of the application instruction.
◎Simple Display
Only the current value will be displayed at the register of the application instruction.
All current values of the register are displayed by the notation that was selected at
the "type of register display mode."
The current value of the byte /word treatment instruction will be displayed as byte
/word, but the current value of the double word treatment instruction will be
displayed in word. (only the lower words are displayed.)
◎Detail Display
Display the current value and the notation in the register of the application
instruction.
You can select the "effectire area of type of register display mode."
The current value at the byte /word /double word treatment instruction will be
displayed in byte /word /double word display.
Select the notation display type of the register during the application instruction from
HEX (hexadecimal notation), DCML(decimal notation), OCT(octal notation).
Select the effective area of the notation display which was selected at the "type of
register display mode." If the "tye of monitor display mode" is the "easy display," you
can not select. In this case, it will be "all registers."
◎All Registers
Display the current value by the notation selected at the "type of register display
mode" to all the registers during the application instruction.
◎Infinitive Register of Number Type
Only the register of the undecided value type during the application instruction will
display the current value by the notation selected at the "type of register display
mode."
The register during the instruction (F-08［transfer of octal notation］etc.) whose
value type has been established will display the current value by the notation of the
value type.
Item
Type of Monitor
Display Mode
Effective Area of
Type of Register
Display
Type of Register
Display Mode
Decimal notation display
Decimal notation display
Decimal notation display
■■
■■
■ Select Monitoring Display Type (Program : Ladder)
(1) Function
Assign (select) the monitor type during the monitor at the ladder window.
Decinal notation display
(the register with undecided
numerical value type)
Decimal notation display
(the register with established
numerical value type)
Octal notation display
(the register with established
numerical value type)
Example 1) Type of monitor display mode : simple display, type of register display mode : DCML
Example 2) Type of monitor display mode : detail display, type of register display mode : DCML,
effective area of type of register display mode : infinitive register of number type