Instruction manual

5・34
Chapter 5 Menu Operation (Display)
■■
■■
■ View Change (Program)
Change between the ladder window and the mnemonic window.
・When changing, if one of the windows has been edited after the last transformation, a confirmation
message asking either "from ladder to mnemonic" or "from mnemonic to ladder" will be displayed.
・Program : Ladder
■■
■■
■ Select Address Display Type (Program：Ladder)
Select display type of the address/symbol/comment at the ladder program.
Symbol
Content
Only the address will be displayed.
"＊＊＊＊＊" will be displayed if it’s not input at the symbol, and the address is not
assigned. (Symbol assigning method⇒ refer to the page 5-27)
If the symbol is setup, the symbol will be displayed. Also, all address inputs are executed
with the symbol. (Symbol input ⇒ refer to the pages 6-8, 6-15)
If the comment is set up, the comment will be displayed in 8 characters by 4 lines. You can
input the comment when inputting the address.
If the comment is set up, the comment will be displayed in 16 characters by 2 lines. You
can input the comment when inputting the address.
When it is set to Address, you can also see the symbol or comment. You can input the
symbol/comment when inputting the addres.
Item
Normal
Comment (8c, 4l)
Comment (16c, 2l)
Full (Address/
Symbol/Comment)
・Refer to the page 6-2 about the example for display.
Ladder window
Mnemonic window
View Change