Instruction manual

ManualsBrandsSharp ManualsComputer equipmentPC-9800T

SLadder logic programmning software

JW-100SP

Version 3.1

Produced in Sep. 2001

Instruction Manual

Model name

Summary of content (271 pages)

PAGE 1
Version 3.1 Produced in Sep.
PAGE 2
Thank you for purchasing the ladder logic programming software JW-100SP. Please read the instruction manual carefully in order to apply the software correctly by understanding its functions and operations. Please keep this instruction manual near you. It will certainly help you when you encounter problems. Note ・This manual describes the version 5.10 2.
PAGE 3
Ladder logic programming software JW-100SP ■ Instruction Manual Chapter 1 Introduction Chapter 2 Setup Chapter 3 Basic operation Chapter 4 Let’s create program Chapter 5 Menu operation Chapter 6 Program edit Chapter 7 Setup each data Chapter 8 Monitor Chapter 9 Print
PAGE 4
Table of Contents Chapter 1 Introduction ･････････････････････････････････････････････････ 1･1∼9 1-1 Features 1•1 1-2 Compatible PC models 1•2 1-3 System requirements 1•2 1-4 Connection between the personal computer and the PC ■ Basic system organization 1•3 ■ System organization using communication 1•4 1-5 Product organization 1•8 ■ Ladder logic programming software (JW-100SP) 1•8 ■ Communication adapter (JW-100SA) 1•8 1-6 Caution 1•8 ■ On-line caution up on using the monitor 1•8 1-7 Conventions used in th
PAGE 5
■ Monitor ■ Display ■ Setup ■ PC ■ Tools 3•24 3•25 3•25 3•26 3•26 ■ Window 3•27 ■ Help 3•27 Chapter 4 Let's create program ･････････････････････････････････････････ 4･1∼21 4-1 Start-up JW-100SP 4•2 4-2 Create ladder program 4•4 ■ Setup input type 4•4 ■ Inputting A contact, B contact and coil 4•5 ■ Inputting timer and counter 4•9 ■ Inputting application instruction 4•10 ■ Program check and conversion to mnemonic 4-3 PC transfer/monitor 4•16 4-4 Print 4•19 ■ The print example 4•21 4•13 Chapter 5 Menu op
PAGE 6
■ Create Line Comment 5•19 ■ Zoom 5•20 ■ Jump 5•21 ■ Library 5•23 ■ Program Check 5•24 ■ Converts data in batch 5•25 ■ Replacing Contacts 5•26 ■ Assigns symbol 5•27 5-3 Instruction 5•29 5-4 Monitor 5•30 5-5 Display 5•31 ■ Main toolbar /Sub toolbar /Status bar /Tree bar /Toolbar for editing ladder /Toolbar for editing mnemonic /Toolbar for editing data /Message bar 5•33 ■ Select address display type 5•34 ■ View change 5•34 ■ Select monitoring display type 5•35 ■ Change segment file 5•36 ■ Word wrap 5•37 ■ Da
PAGE 7
■ Modem Connection 5-8 Tool 5•73 ■ Library 5•73 ■ Multipoints monitor ■ Sampling Trace ■ Option parameter ■ CAD interface 5•74 5-9 Window 5•76 ■ Open New Window ■ Overlap Display 5•78 ■ Cascade Display ■ Arrange Icons 5•80 ■ Window Name 1, 2, ••• 5-10 Window 5•82 ■ Find Topic 5•82 ■ Version Data 5•83 5•72 5•73 5•73 5•73 5•77 5•79 5•81 Chapter 6 Program edit ･････････････････････････････････････････････････ 6･1∼47 6-1 Ladder programming 6•1 ■ [Program:Ladder] window 6•1 ■ Select address display type 6•2
PAGE 8
Chapter 7 Setup each data ･･････････････････････････････････････････････ 7･1∼13 7-1 Setup system memory 7•1 ■ Summary display /operation of system memory ■ Setup /display of property sheet 7•2 ■ Manual I/O registration 7•3 7-2 Setup data memory 7•5 ■ Summary display /operation of data memory 7-3 Setup symbol/comment 7•6 ■ Summary display /operation of symbol/comment ■ Applying text file 7•7 7-4 Setup parameter 7•8 ■ Summary display /operation of parameter 7•8 ■ Setup model (special I/O module/option module)
PAGE 9
-3 Print setup 9•18 9-4 Print preview 9•20 9-5 Print 9•22 Table of Contents-6
PAGE 10
Chapter 1 Introduction Chapter 1 Introduction JW-100SP is a ladder logic programming software that is capable of creating a program by ladder and mnemonic of Sharp New Satellite JW Series PC (programmable controller), as well as setting up data memory, system memory, symbol & comment, and the parameter. Once created program or various data can be saved as file, or saved as document after having it printed.
PAGE 11
Chapter 1 Introduction 1-2 Compatible PC Model The following JW series PC models are compatible to this software: P C Control Module (CPU) JW10 JW-1324K、JW-1424K、JW-1624K JW-1342K、JW-1442K、JW-1642K JW20,JW20H JW-21CU、JW-22CU JW30H JW-31CUH、JW-32CUH、JW-33CUH JW-31CUH1、JW-32CUH1、JW-32CUM1 JW-33CUH1、JW-33CUH2、JW-33CUH3 JW50/70/100 JW-50CU、JW-70CU、JW-100CU JW50H/70H/100H JW-50CUH、JW-70CUH、JW-100CUH J-board Z-311J、Z-312J、Z-313J、Z-511J、Z-512J VME built-in controller JW-32CV1、JW-32CV2 W100 ZW-1K
PAGE 12
Chapter 1 Introduction 1-4 Connection between the Personal Computer and the PC ■ Basic System Organization JW50/70/100 JW50H/70H/100H control module Network module ZW-20CM COMM SD RD CD LT TEST ERROR FAULT W16 W51, W100 W70H/100H control module ＳＯＳ１Ｓ２Ｓ３Ｓ４Ｓ５Ｓ６Ｓ７ Remote I/O slave station module ME-NET COMM SD RD CD LT TEST COM.E UNT.
PAGE 13
Chapter 1 Introduction ■ System Organization Using Communication ：Satellite net) (1) Network connection (Standard： JW50H/70H/100H JW-20CM JW50H/70H/100H JW-20CM JW20H/30H JW-22CM 456 901 78 23 456 456 23 #01 23 #00 78 901 901 78 #77 Satellite net (data link function) maximum 64 stations, maximum 1km Personal computer Communication adapter (JW-100SA) Connection cable (ZW-3KC) When connected with JW-22CM：JW-22KC/24KC Ladder logic programming software (JW-100SP) ・Remote programming/monitor
PAGE 14
Chapter 1 Introduction ：ME-NET) (3) Network connection (Standard： JW50H/70H/100H JW-20MN JW50H/70H/100H JW-20MN JW20H/30H JW-21MN 456 901 78 23 456 456 23 23 #01 #00 78 901 901 78 #77 ME-NET maximum 64 stations, maximum 1km Personal computer Communication adapter (JW-100SA) Connection cable (ZW-3KC) When connected with JW-22CM: JW-22KC/24KC Ladder logic programming software (JW-100SP) ・Remote programming /monitor ・Parameter setup (4) Network connection (Expansion) JW50H/70H/100H JW-20CM
PAGE 15
Chapter 1 Introduction (5) Remote I/O connection JW50H/70H/100H JW-20CM JW-20RS JW-20RS #01 #00 JW-20RS #02 #77 Remote I/O maximum 63 stations, maximum 1km Personal computer Ladder logic programming software (JW-100SP) Communication adapter (JW-100SA) Connection cable (ZW-3KC) ・Remote programming /monitor ・Parameter setup (6) Computer link connection (RS-485 connection) Personal computer Ladder logic programming software (JW-100SP) JW50H/70H/100H JW50H/70H/100H JW-10CM JW-10CM RS-232C/422 conve
PAGE 16
Chapter 1 Introduction (8) Ethernet connection JW50H/70H/100H JW-50CM Host computer JW20H/30H JW-255CM J W -2 5 5 C M CM SD RD12V T ER FT S7 S6 S5 S4 S3 S2 S1 S0 ON S H I E L D OFF FG Transceiver cable (maximum 50m) Maximum 100 stations Transceiver Terminator 10BASE5 coaxial cable (yellow) Coaxial cable segment (maximum 500m) Personal computer Communication adapter (JW-100SA) Ladder logic programming software (JW-100SP) Connection cable (ZW-3KC) Use JW-22KC/24KC when connecting to JW-255CM
PAGE 17
Chapter 1 Introduction 1-5 Product Organization ■ Ladder Logic Programming Software (JW-100SP) CD-ROM ･･････････････････････････････････････ 1 (quantity) Instruction manual ･･････････････････････････････ 1 (quantity) Registration card ･･･････････････････････････････ 1 (quantity) 初版 1998年2月作成 ® JW-100SP ラダー設計支援ソフトラダー設計支援ソフト For Windows 95 / NT 形名 JW-100SP 取扱説明書 Copyright 1998 SHARP MANUFACTURING SYSTEMS CORPORATION. All rights reser ve d.
PAGE 18
Chapter 1 Introduction 1-7 Conventions Used in This Manual ■ Display of Menu, Command, Dialog Box Display [ [ Meaning ] ]-[ ・Displayhe menu name, command name and button name in [ ]. Example) [File] menu, [New] command, [OK] button ・Display the the name of the title bar of the dialog box displayed in [ Example) [Open File] dialog box ] ]. ・Show the layers of menu,command. Example) select [File]-[New].
PAGE 19
Chapter 2 Setup Chapter 2 Setup “Setup” means the condition of the application/software that is ready to be operated by installing it into to the personal computer. In this chapter, the setup order of the ladder logic programming software・JW-100SP is explained. JW-100SP operates under Windows 95/98/Me/NT, but the setup order of this software is explained for Windows 98 environment. 1． Start-up Windows 98, and place the JW-100SP CD-ROM into the CD-ROM drive of the personal computer.
PAGE 20
Chapter 2 Setup 5．Input your [Name] and [Company], and click [Next] button. The next dialog box will be displayed. 6．Click the [Next] button if destination directory is correct. If you want to change the install destination, click the [Browse] button to display the [Choose Folder] dialog box, and assign the drive or folder. Click [OK] button, and click [Next] button. When [Next] button is clicked, [Select Program Folder] dialog box will be displayed.
PAGE 21
Chapter 2 Setup 7．If the program folder is correct, click [Next] button. If you want to change the folder, input the new folder name, or select the folder from the Existing Folder list.Then, click [Next] button to start up the setup. When the setup is completed, the following dialog box will be displayed. 8．If you click [Finish] button, the same screen at the moment of the setup is displayed, and it completes the setup.
PAGE 22
Chapter 3 Basic Operation (Starting-up and Quitting) Chapter 3 Basic Operation 3-1 Starting-up and Quitting How to start or quit JW-100SP will be explained. ■ Starting-up JW-100SP 1．Click [Start] button of the task bar on the Windows 98 screen. 2．Click [Programs]-[Sms]-[JW100SP] on the start menu. Click here Click here JW-100SP will start-up, and the principle screen (the main window) will be displayed.
PAGE 23
Chapter 3 Basic Operation (Starting-up and Quitting) ■ Quitting JW-100SP 1．Click [File]-[Quit] on the menu bar. Click here You can also quit the operation by clicking [X] at the upper-right of the window.
PAGE 24
Chapter 3 Basic Operation (List of files about JW-100SP) 3-2 List of files about JW-100SP JW-100SP opens program-related files and a variety of data at a time so that you can create or edit files about JW-100SP. The list of JW-100SP related files is as follows: Classification Extension Data memory related Parameter related Symbol /comment related Optional parameters related Data compatibility with JW-50SP File type *1 *.pgm Program Yes ● *.lad Ladder screen information No ● *.
PAGE 25
Chapter 3 Basic Operation (Screen Configuration) 3-3 Screen Configuration ■ Screen when you create new file When you create new file, the [Program: Ladder] windows will be displayed as follows: ① ② ⑦ ③ Tab ⑤ ⑥ ④ ①Menu Bar ②Main Toolbar ③Sub Toolbar ④Status Bar ⑤Tree Bar ⑥Message Bar ⑦Toolbar for Editing Ladder ：If you click the item name, the menu that calls for JW-100SP functions will be opened. Refer to“Chapter 5 Menu Operation” . ：If you click the button, it calls for that function.
PAGE 26
Chapter 3 Basic Operation (Screen Configration) ■ Main Toolbar PC model name Program memory capacity Project name ◎New Same as [File]-[New] Create a new file (program, system memory, data memory, symbol/comment, or parameter). ◎Open Same as [File]-[Open] Open the existing file (program, system memory, data memory, symbol/comment, parameter).
PAGE 27
Chapter 3 Basic Operation (Screen Configuration) ◎Print Preview Display the printing image. Same as [File]-[Print Preview] ◎Version Same as [Help]-[Version Data (MMVIEW)] Display the version of JW-100SP. ■ Sub Toolbar Search history Ladder display magnifying power ◎Find Same as [Edit]-[Find] Find the mnemonic, address (relay, register etc..), character line (symbol, comment etc..).
PAGE 28
Chapter 3 Basic Operation (Screen Configration) ◎Word-wrap View Same as [Display]-[folding]-[On] Display each program line, which is longer than the window's width, folded in the ladder program window. ■ Message Bar Display the operation completed message or the error message. If you click the right side of the mouse on the message bar, the following menu will be displayed, and you can erase the message if you select the command. Clear All ：Erase all messages inside the message bar.
PAGE 29
Chapter 3 Basic Operation (Screen Configuration) ■ Toolbar for Editing Ladder Use when creating ladder program. ◎A Contact Used when inputting A contact. Same as [Instruction]-[A contact] ◎B Contact Same as [Instruction]-[B contact] Used when inputting B contact. ◎Vertical Line Same as [Instruction]-[Vertical Line] Used when inputting vertical line. ◎Horizontal Line Same as [Instruction]-[Horizontal Line] Used when inputting horizontal line.
PAGE 30
Chapter 3 Basic Operation (Screen Configration) ■ Toolbar for Editing Mnemonic Use when creating the mnemonic program. ◎STR Instruction Same as [Instruction]-[STR] Used when inputting STR, STR NOT, AND STR, OR STR instruction. ◎AND Instruction Same as [Instruction]-[AND] Used when inputting AND, AND NOT, AND STR instruction. ◎OR Instruction Same as [Instruction]-[OR] Used when inputting OR, OR NOT, OR STR instruction.
PAGE 31
Chapter 3 Basic Operation (Screen Configuration) ■ Toolbar for Editing Data Used when selecting data display types of system memory, data memory, parameter. ◎Displays in Binary Notation Displays data in binary notation Same as [Display]-[Display in Binary Notation] ◎Displays in Octal Notation Displays data in octal notation. Same as [Display]-[Display in Octal Notation] ◎Displays in Decimal Notation Displays data in decimal notation.
PAGE 32
Chapter 3 Basic Operation (Kinds of Windows) 3-4 Kinds of Windows There are following kinds of window in JW-100SP.
PAGE 33
Chapter 3 Basic Operation (Kinds of Windows) ■ Basic Window Basic window can be selected by clicking on the tree bar, or by the [Window] menu of the menu bar. Tree Bar [Window] menu There are six basic windows below: Window Name [Program:Ladder] window [Program:Mnemonic] window [System] window [Data] window [Symbol] window [Parameter] window Contents Possible PC models for selection Create, save, monitor, print , etc... the ladder program All models Create, save, monitor, print , etc...
PAGE 34
Chapter 3 Basic Operation (Kinds of Windows) (1) [Program:Ladder] window (2) [Program:Mnemonic] window (3) [System] window (4) [Data] window 3・13
PAGE 35
Chapter 3 Basic Operation (Kinds of Windows) (5) [Symbol] window (6) [Parameter] window 3・14
PAGE 36
Chapter 3 Basic Operation (Kinds of Windows) ■ Other Windows The followings are the windows that are displayed when "command" of the menu bar is selected. Window name Possible windows for selection Commands of the menu bar etc...
PAGE 37
Chapter 3 Basic Operation (Kinds of Windows) (1) [Register Library] window (2) [Assign Symbol] window (3) [Data List] window 3・16
PAGE 38
Chapter 3 Basic Operation (Kinds of Windows) (4) [Multipoints Monitor] window (5) [Sampling Trace] window (6) [Option Parameter] window 3・17
PAGE 39
Chapter 3 Basic Operation (Kinds of Windows) (7) [Edit Circuit (Change)] window (8) [HF Edit] window (9) [Help] window 3・18
PAGE 40
Chapter 3 Basic Operation (Selection of Commands) 3-5 Selection of Commands A command is an instruction for JW-100SP to take the responsible tasks. To select a command, one of the following operations is taken in measure. ①Click the button of the toolbar (Main Toolbar, Sub Toolbar) ②Select the command from the menu. ③Select the command from the shortcut menu. ④Use the shortcut key.
PAGE 41
Chapter 3 Basic Operation (Selection of Commands) (2) When selecting the command by keyboard It you want to select a command by keyboard, press [Alt] key to make the menu bar active, and press the key that matches the underlined characters just after the menu name.
PAGE 42
Chapter 3 Basic Operation (Selection of Commands) ■ Use the Shortcut Key Among commands, there are commands that can be selected by pressing the shortcut key which is displayed at the right side of the command name when the menu is opened. For example, to create a new file, press [N] key with [Ctrl] key being pressed. There are following shortcut keys.
PAGE 43
Chapter 3 Basic Operation (Function Summary) 3-6 Function Summary Here, the function (command) of the menu bar of the main window and the basic window is explained. Depends of the window, the “yes/no” functions are different. In addition, refer to “Chapter 5 Menu Operation” for the detail of each function. ■ File Command Function New Create a new basic file (program, system, data, symbol, parameter). Open Open the existing basic file (program, system, data, symbol, parameter).
PAGE 44
Chapter 3 Basic Operation (Function Summary) ■ Edit Command Function Undo It brings back the previous state of the operation. Cut Cut the selected area and saves it for the moment. Copy Save the selected area and saves it for the moment. Paste Paste the data that was cut or copied onto the position of the cursor. Image Copy Temporarily keep in the clipboard the selected area you are editing in the program ladder window as an image data. Find Find mnemonic, address (relay, register etc..
PAGE 45
Chapter 3 Basic Operation (Function Summary) ■ Instruction Command Function A Contact Used for inputting A contact when editing ladder. B Contact Used for inputting B contact when editing ladder. Horizontal Line Used for inputting horizontal line when editing ladder. Vertical Line Used for inputting vertical line when editing ladder. STR Used for inputting STR, STR NOT, AND STR, OR STR when editing mnemonic. NOT Used for inputting STR NOT, AND NOT, OR NOT when editing mnemonic.
PAGE 46
Chapter 3 Basic Operation (Function Summary) ■ Display Command Function Display Type Select the display of the address/symbol inside the ladder program. Change Display Change between ladder and mnemonic window. Changes Type of Monitor Assign the monitoring type of the ladder program (notation display yes/no),and the register display type (octal/decimal/hexadecimal) Change Segment Display Change between the file 8 and file 9 of the program area. Data List [Data List] window is opened.
PAGE 47
Chapter 3 Basic Operation (Function Summary) ■ PC Command Function PC Transfer [Write] Write program, a variety of data to the PC. PC Transfer [Read] Read program, a variety of data to the PC. PC Transfer [Verify] Verify with the program and the variety of data of the PC. Start/Stop Run/stop the PC. PC Operation [I/O Search] Execute I/O search of the PC. PC Operation Register/Change Password Register/change the password of the PC. [Secret] Delete Password Delete the password of the PC.
PAGE 48
Chapter 3 Basic Operation (Function Summary) ■ Window Command Function Open New Window Open the new window that carries the same content as the currently active Window . Overlap Display Display windows in piles. Cascade Display Display windows in a row. Arrange Icons Arrange icons under the window. Window name1, 2, ... Activate the assigned window. ■ Help Command Function Find Topic Display the table of contents, or“help”regarding the assigned item by the Keyword.
PAGE 49
Chapter 4 Let's Create Program Chapter 4 Let's Create Program In this chapter, basic operations such as creating a ladder program, transferring a created program to the PC, monitoring a program or printing a program, are explained. ■ System Configuration Operations explained in this chapter require the following system configuration.
PAGE 50
Chapter 4 Let's Create Program 4-1 Start-up JW-100SP 1. Click [Start] button at the task bar on the screen of Windows 95/98. 2. Click [Programs]-[Sms]-[JW100SP] on the start menu. Click here JW-100SP will start-up, and the initial screen will be displayed. 3. Click [File]-[New] of the menu bar.
PAGE 51
Chapter 4 Let's Create Program 4. When the [New] dialog box is displayed, input the file name you are creating in the file name box. (In the example below, "new" is input as the file name.) If you want to change the position (directory) of the created program, click [Browse] button and select the directory (Refer to the page 5-4 for more detail). 5. If you click [OK] button, [Select PC Model] Dialog box will be displayed. 6. After clicking [Series Selection] box, click [JW30H]. 7.
PAGE 52
Chapter 4 Let's Create Program 4-2 Create Ladder Program The creating order of the following ladder programs is explained. 00000 00002 T0001 00020 00012 C0002 00021 00001 00010 00011 00003 TMR 0050 0001 00004 CNT 0010 0002 00005 00006 F-63 09100 INC F-40 END There are two types of input methods of ladder programs：direct input and dialog input. For the detail of each method, refer to “Chapter 6 Program Edit.” Here, the dialog input is explained mainly. ■ Setup Input Type 1.
PAGE 53
Chapter 4 Let's Create Program 2. When [Setup Input Type] dialog box is displayed, setup the following, and click [OK] button. ■ Inputting A Contact, B Contact and Coil 3. Move the mouse cursor to the cell that is at the left side up of the ladder display (column：0 row： 0), and click. 4. When inputting A contact, click [X] of the toolbar for editing ladder. The following [A contact] dialog box will be displayed. 5. After inputting the relay number (No need of inputting when “00000” ), click [OK] button.
PAGE 54
Chapter 4 Let's Create Program 6. When inputting B contact, click of the toolbar for ediing ladder. The following [B contact] dialog box will be displayed. 7. After inputting the relay number([2] in case of“00002”), click [OK] button. B contact will be displayed and the cell cursor will move to the right cell. 8. To input TMR contact (A contact), first click of the toolbar for ediing ladder. [A contact] dialog box will be displayed, and press inside the box. 9.
PAGE 55
Chapter 4 Let's Create Program 11. After inputting the relay number ([2] [0] in case of “00020” ), click [OK] button. OUT instruction will be displayed, and the cell cursor will move to the right cell. 12. Move the cell cursor to the row number 000001 , and after inputting A contact (00001) as the same way as the order No.4 and No.5, move the cell cursor on the A contact (00001). 13. Click . A contact (00001) will be connected by OR (OR connection). 14.
PAGE 56
Chapter 4 Let's Create Program 16. Move the mouse cursor to the row number 000002. 17. If you click [Edit]-[Paste] of the menu bar, “copy” is executed. Click here 18. If you double click on the contact where a relay number is changed, input of the relay number will be possible. 19. After inputting the relay number ([1] [0] in case of 00010), if you press [Enter] key, the relay number will be changed, and the cell cursor will move to the next contact. 20.
PAGE 57
Chapter 4 Let's Create Program ■ Inputting Timer and Counter 21. Input “A contact 00003” as the same way as the order No.3 to No.5. 22. To input TMR instruction, click of the toolbar for editing ladder. The following [TMR Instruction] dialog box will be displayed. 23. Setup TMR type, TMR No. and setup value as the following. 24. If you click [OK] button, TMR instruction will be input. 25. After inputting “A contact 00004” and“A contact 00005”as the same way as the order No.3 to No.
PAGE 58
Chapter 4 Let's Create Program 27. Setup CNT type, CNT No. and setup value as the following. 28. If you click [OK] button, CNT instruction will be input. ■ Inputting Application Instruction 29. Input“A contact 00006”as the same way as the order No.3 to No.5. 30. When inputting application instruction, click of the toolbar for ediing ladder. The following [Select Application Instruction] dialog box will be displayed. 31.
PAGE 59
Chapter 4 Let's Create Program 32. If you click [OK] button, [Timer/counter instruction] dialog box will be displayed. 33. After clicking [ 09100. ] , select [09000] and input [1] [0] [0]. Then you can assign the register 34. If you click [OK] button, F-63 (INC) instruction will be input. 35. After moving the cell cursor to the next line, (the next position is optional), if you click button, [Select Application Instruction] dialog box will be displayed.
PAGE 60
Chapter 4 Let's Create Program 36. Double click [END] at the detail classification chart. Double click here 37.If you double click [End instruction [F-40]], the instruction at the instruction input will be displayed. Double click here 38.If you click [OK] button, [Execution condition instruction] dialog box will be displayed. 39.If you click [OK] button, F-40 [END] instruction will be input.
PAGE 61
Chapter 4 Let's Create Program ■ Program Check and Conversion to Mnemonic Check the created ladder program and execute conversion of ladder to the mnemonic. 40. Click [Edit]-[Program Check] of the menu bar. Click here 41. [Program Check] dialog box will be displayed, and click the appropriate item to mark the check mark. Here all check marks are checked.
PAGE 62
Chapter 4 Let's Create Program 42. If you click [Start] button, the program check will start, and if there is a program error, an error information at the message window will be displayed. (Example of the program error) ←Over-using the output 00020 twice If you execute the program check, it will also execute the conversion to the mnemonic at the same time. If there is an error like the disconnected circuit, an error information at the [Compile error] dialog will be displayed.
PAGE 63
Chapter 4 Let's Create Program Reference If you click the button of the toolbar for editing ladder at the time when the ladder program display is being displayed, the conversion from ladder to mnemonic will take place. However, the “program check” will not be executed. 44. If you click of the toolbar for editing mnemonic, the conversion from mnemonic to ladder will take place.
PAGE 64
Chapter 4 Let's Create Program 4-3 PC Transfer//Monitor Transfer the created ladder program to PC (JW-33CUH1), and execute the monitoring of data. 1. Click [Setup]-[Communication Setup] of the menu bar. 2. [Communication Setup] dialog box will be displayed, and select [PC itself]. Match the port number of [COM.Port] to the port number of the personal computer. 3. If you click [Setup in Detail] button, [Setup COM Baud Rate] dialog box will be displayed. 4. Select “high speed (115.2kbps)”.
PAGE 65
Chapter 4 Let's Create Program 7. Click [PC]-[PC Transfer]-[Write] of the menu bar. Click here 8. [PC Transfer Write] dialog box will be displayed, and check “Program Memory” . If you click [OK] button, it will start the transfer (Here, only the program is being transferred.) 9. When the transfer is completed, the following dialog box will be displayed, and click [OK] button. 10. Click [PC]-[Start/Stop] of the menu bar, the following dialog box will be displayed. Click here 11. Click [OK] button.
PAGE 66
Chapter 4 Let's Create Program 13. [Setup Monitor Display Mode] dialog box will be displayed, and setup as the following. Click [OK] button. 14. If you click [Monitor]-[Start Monitoring] of the menu bar, the ladder monitor will start. Click here Thick line represents the condition of running through. Thin line represents the condition of not running through. Current value：BCD Current value：decimal 15. If you click [Monitor]-[Stop Monitoring] of the menu bar, the ladder monitor will stop.
PAGE 67
Chapter 4 Let's Create Program 4-4 Print Print the created ladder programs. 1. Click [File]-[Page Setup] of the menu bar. Click here 2. [Ladder Print] dialog box will be displayed, and change the setups according to each needs. Here, we setup the following, and click [OK] button. 3. If you click [File]-[Print Preview] of the menu bar, the print image will be displayed.
PAGE 68
Chapter 4 Let's Create Program Clicking [Zoom In] button makes the display larger, and clicking [Zoom Out] button will make the display smaller. 4. If you click [Print] button, [Print] dialog box will be displayed. 5. Click [Properties] button, and after changing the setup according to the need, click [OK] button. 6. If you click [OK] button at the [Print] dialog box, it starts printing.
PAGE 69
Chapter 4 Let's Create Program ■ The Print Example 4・21
PAGE 70
Chapter 5 Menu Operation (File) Chapter 5 Menu Operation The operation of each menu of the menu bar of the main window and the basic window (program：ladder/ program：mnemonic/system/data/symbol/parameter) are explained. The menu bar varies according to the window.
PAGE 71
Chapter 5 Menu Operation (File) ・ Menu bar of [Program : Mnemonic] window (Details in pages) 5-3 5-12 5-29 5-30 5-31 5-46 5-59 5-73 5-76 5-82 ・ Menu bar of [System/Data/Parameter] window (Details in pages) 5-3 5-12 5-30 5-31 5-46 5-59 5-73 5-76 ・ Menu bar of [Symbol] window (Details in pages) 5-3 5-12 5-31 5-46 5-59 5・2 5-73 5-76 5-82 5-82
PAGE 72
Chapter 5 Menu Operation (File) 5-1 File (Main/Program/System/Data/Symbol/Parameter) If you click [File] at the menu bar of each window, [File] menu summary will be displayed.
PAGE 73
Chapter 5 Menu Operation (File) ■ New (Main/Program/System/Data/Symbol/Parameter) (1) Function Create a new file. (2) Operation content ① Click [File]-[New] from the menu bar ⇒ [New] dialog box will be displayed. ② ③ Example for display ④ ② Input the file name. ③ Determine the folder where you will create the file. Click [Browse]. and the [Browse for Folder] dialog box will be displayed. １２ 1. Select the folder. 2. Click [OK]. Notes ・ This software cannot open more than one files at the same time.
PAGE 74
Chapter 5 Menu Operation (File) ④ Click [OK] of [New] dialog box ⇒ The [Select PC Model] dialog box will be displayed. ⑤ Setup the model 1. Click [▼] of select series ⇒ series summary will be displayed. 2. Click the series name that you are going to select. ⇒ Selected model summary of the series will be displayed under "Model Selection" chart.
PAGE 75
Chapter 5 Menu Operation (File) ・ Display example of ladder window ■ Open (Main/Program/System/Data/Symbol/Parameter) (1) Function Open the existing file (program, system memory, data memory, symbol/comment, parameter). (2) Operation content ① Click [File]-[Open] from the menu bar ⇒ [Open] dialog box will be displayed.
PAGE 76
Chapter 5 Menu Operation (File) ② Select the directory at "Look in" ③ Select the kind at "Files of type" box File Type JW100SPfile (*.pgm, *.syc, *.dfi, *.sys, *.prm), Program(*.pgm), System(*.sys), Data(JW100SP type)(*.dfi), Symbol/Comment(JW100SP type)(*.syc), Parameter(*.prm) ・For classification and extension of the file, refer to the page 3-3. ④ Select the reading file ⇒ file that was selected at "File name" chart will be displayed.
PAGE 77
Chapter 5 Menu Operation (File) ■ Save (Program/System/Data/Symbol/Parameter) Save the currently active file without changing its name or its saved place. If the file has been modified after it was saved last time, the confirmation dialog box will be displayed. ・If you are saving by changing the name and the place of the saved file, use [Save As] of the [File] menu. ■ Save As (Program/System/Data/Symbol/Parameter) (1) Function Save the currently operating file by putting a new name.
PAGE 78
Chapter 5 Menu Operation (File) ■ FD Verify (Program/System/Data/Symbol/Parameter) Verify the files in operation with the files saved in the hard disk or floppy disk. ■ Page Setup (Program/System/Data/Symbol/Parameter) Setup the format of the page for printing.. ⇒ For details, refer to "Chapter 9 Print." ■ Print Program (Program/System/Data/Symbol/Parameter) Print the content of the open window. ⇒ For details, refer to "Chapter 9 Print.
PAGE 79
Chapter 5 Menu Operation (File) ■ Export Files (Data/Symbol) (1) Function Save the file about data memory or symbol/comment, specifying the file format. (2) Operation ① Click [File]-[Export Files] from the menu bar. ⇒ The [Export Files] dialog box will be displayed. ② ④ ⑤ ③ ② Determine the folder where you will save the file. ③ Select the file type. File Type Data memory File Format Data JW100SP type(*.dfi), Data JW50SP type(*.dat), File JW50SP type(*.fil) Symbol/Comment JW100SP type(*.
PAGE 80
Chapter 5 Menu Operation (File) ■ Import Files (Data/Symbol) (1) Function Import the file about data memory or symbol/comment. (2) Operation ① Click [Import Files] of the [File] menu. ⇒ The [Import Files] dialog box will be displayed. ② ④ ⑤ ③ ② Determine the folder where the file you will import is located. ③ Select the file type. File Type Data memory File Format (*.dfi, *.dat, *.fil) Data JW100SP type(*.dfi), Data JW50SP type(*.dat), File JW50SP type(*.fil) Symbol/Comment (*.syc, *.sye, *.sym, *.
PAGE 81
Chapter 5 Menu Operation (Edit) 5-2 Edit (Program/System/Data/Symbol/Parameter) If you click [Edit] at the menu bar of each window, the edit menu summary will be displayed.
PAGE 82
Chapter 5 Menu Operation (Edit) ■ Undo (Program/System/Data/Symbol/Parameter) Cancels the editing that has just been executed, and bring back the same cell /row as before. ・According to the operation content, there are items that you can not cancel. ■ Cut (Program/System/Data/Symbol/Parameter) Delete the selected cell/row and saves it momentary. ・Assign the cutting area before executing this operation. ・If you cut the cell/row, the content that was momentary saved will be replaced by the new content.
PAGE 83
Chapter 5 Menu Operation (Edit) ■ Find (Program/System/Data/Symbol/Parameter) Assign the character line (address, instruction, symbol) in the selected file, and search. There are two types of search methods: "Find for the first time" and "Find continuously." [1] Find for the First Time When searching a character string for the first time, input it in the [Find] dialog box.
PAGE 84
Chapter 5 Menu Operation (Edit) ② Select of "Item to find" According to the operation window, the object of search varies. (You cannot search the item other than search objects.) Data /Symbol Program System Address, Constant Relay,Register System memory Relay,Register Instructions STR, AND, etc.
PAGE 85
Chapter 5 Menu Operation (Edit) [2] Find Continuously In case of finding the character line that was once found, use the "Find history." ・Once found character line will be added to the "Find history" combo box. (1) Operation content ① (Display example of the program) ① Click [ ▼ ] of the "Find history." ⇒ Display the once found character line summary. ③ ② ④ ② Click the character to find ⇒ It is displayed on the combo box of "Find history." ③ Click (Find next) or ④ (Find previous) ⇒ It starts finding.
PAGE 86
Chapter 5 Menu Operation (Edit) ■ Find Previous (Program/System/Data/Symbol/Parameter) Find already assigned character lines towards forward in the selected file. ・Select the character line from "Find history" summary of the sub toolbar. ・Refer to the previous page for the operation method. ■ Find Next (Program/System/Data/Symbol/Parameter) Find already assigned character lines backwards in the selected file. ・Select the character line from "Find historys" ummary of the sub toolbar.
PAGE 87
Chapter 5 Menu Operation (Edit) ■ Insert Cell (Program：Ladder) Insert the cell in the assigned position. ・You can select several cells. ・All cells that are right of the inserted position will move to the right direction the same amount of columns of the cell inserted. ・Refer to the page 6-21 for the use example. ■ Insert Row (Program) Insert the row in the assigned position. ・All rows that are below the inserted position will move down the same amount of the inserted rows.
PAGE 88
Chapter 5 Menu Operation (Edit) ■ Create Line Comment (Program) Make the assigned line to the line comment. ・An input box is displayed in the row, so that you can write in the comment. ・The character number of the line comment is 100 characters. ・A Row that become the line comment becomes NOP instruction inside the PC. ・Rows during the network can not become line comments.
PAGE 89
Chapter 5 Menu Operation (Edit) ■ Zoom (Program : Ladder) Enlarge /contract the window display of the ladder program. (1) (2) (1) Zoom (+) Enlarge 1 rank up the window display of the ladder program. ・Enlargement rates are: 113%, 125%, 138%, 150%, 163%, 175%, 188%, and 200%. ・You can enlarge, for example, from 88% → 100%. ・You can select from the magnifying power chart of the sub toolbar. (2) Zoom (–) Contract 1 rank down the window display of the ladder program.
PAGE 90
Chapter 5 Menu Operation (Edit) ■ Jump (Program) Move (jump) to the assigned row. There five types for ladder and four types for mnemonics. (1) (2) (3) (4) (5) * (Menu of ladder) * "To Program Address" (5) is not for mnemonics. (1) To Top Row Move to the front of the window. (2) To Unedited Row In case of the ladder, it moves to the unwritten row, and in case of the mnemonic, it moves to the NOP instruction. (3) To Assigned Row Moves to the assigned row number by the [Jump to Assigned Row] dialog box.
PAGE 91
Chapter 5 Menu Operation (Edit) (4) To Address Mark If you select the address mark that was setup already by the [Go to Address Mark] dialog box , it moves to the row where the address mark was added. ●About the address mark function You can add address mark in the optional row of a window. ① Adding method If you click in the area of row selection, the address mark will be displayed on the left of the row.
PAGE 92
Chapter 5 Menu Operation (Edit) (5) To Address Mark Move to the address specified in the [Jump to Program Address] dialog box. ■ Library (Program : Ladder) In the library window, "Create library," "read file," and "save file" operations are executed. This operation is executed under the [Library] of the [Edit] menu. ・Program:Ladder ● Library Item Content Read If you click [Library]-[Read], the library window will be displayed.
PAGE 93
Chapter 5 Menu Operation (Edit) ■ Program Check (Program) (1) Function Check the grammar and the format of the program The following are the check items. Check item Stack use condition MCS /MCR use condition JCS /JCR use condition Double use of the output instruction Double use of TMR /CNT /MD instruction Use condition of ONLS /ONLR Use condition of Label Use condition of FOR /NEXT instruction (2) Operation content ① Click [Edit]-[Program Check] of the menu bar.
PAGE 94
Chapter 5 Menu Operation (Edit) ■ Converts Data in Batch (Program) (1) Function The whole program including relay /timer /register /label number are modified in batch. (2) Operation content ① Click [Edit]-[Converts Data in Batch] of the menu bar of the program ⇒ [Converts Data in Batch] dialog box will be displayed. ③ ④ ② ⑤ ② Select the item to convert Select the kinds (Relay, TMR /CNT, Register, Label) for conversion data in batch.
PAGE 95
Chapter 5 Menu Operation (Edit) ■ Replacing Contacts (Program : Ladder) (1) Function Interchange A contacts with B contacts in the specified relay address, and vice versa, about the program in operation. (2) Operation content ① Click [Replacement No and Nc] of the [Edit] menu in the menu bar of the program:ladder. ⇒ [A Contact B Contact ] dialog box will be displayed. ② ③ ② Determine the relay address whose contacts will be interchanged.
PAGE 96
Chapter 5 Menu Operation (Edit) ■ Assigns Symbol（Program : Ladder/Symbol） (1) Function When creating the ladder program, assign the symbol which was temporarily registered by the symbol input, to the actual address. (2) Operation content ① Click [Edit]-[Assign Symbol] of the menu bar ⇒ [Assign Symbol] dialog box will be displayed. ④ ② ③ (Display example) Item Content Symbol Display the temporary registered symbol.
PAGE 97
Chapter 5 Menu Operation (Edit) ④ Click [File]-[OK] ⇒ (Display example) ・ The symbol assigning the address will be registered in the symbol/comment window. ・ The progress of the register will be displayed at the message bar. ・ The symbol that completed the registration will be deleted from the list of [Assign Symbol] dialog box. ・ Until you click [OK], the symbol assigning the address remain temporary registered.
PAGE 98
Chapter 5 Menu Operation (Instruction) 5-3 Instruction (Program) If you click [Instruction] at the menu bar of the [Program] window, [Instruction] menu summary will be displayed. ・Program：Ladder Menu item ・Program：Mnemonic Content A contact When editing the ladder, Input A contract. B contact When editing the ladder, Input B contract. Horizontal line When editing the ladder, Input horizontal line. Vertical line When editing the ladder, Input vertical line.
PAGE 99
Chapter 5 Menu Operation (Monitor) 5-4 Monitor (Main/Program/System/Data/Parameter) If you click [Monitor] at the menu bar of each window, [Monitor] menu summary will be displayed. ・Main ・Program : Mnemonic/System/Data/Parameter ・Program : Ladder Menu item Content Start Monitoring Start the monitoring. Stop Monitoring Stop the monitoring. I/O Force Processing Select either ON/ OFF of the relay of the PC by force.
PAGE 100
Chapter 5 Menu Operation (Display) 5-5 Display (Main /Program /System /Data /Symbol /Parameter) If you click [Display] at the menu bar of each window, [Display] menu summary will be displayed.
PAGE 101
Chapter 5 Menu Operation (Display) ・Parameter ・Symbol (Details in pages) 5-43 〃〃〃〃 (Details in pages) 5-44 〃〃 5-45 〃 5-33 〃〃〃〃〃 5-33 〃〃〃〃〃 5・32
PAGE 102
Chapter 5 Menu Operation (Display) ■ Main Toolbar /Sub Toolbar /Status Bar /Tree Bar / Toolbar for Editing Ladder / Toolbar for Editing Mnemonic /Toolbar for Editing Data / Message Bar (Main/Program/System/Data/Symbol/Parameter) Select "yes /no" of the display of each bar at the window. When "yes" is selected, a check mark is displayed besides each bar name.
PAGE 103
Chapter 5 Menu Operation (Display) ■ Select Address Display Type (Program：Ladder) Select display type of the address/symbol/comment at the ladder program. ・Program : Ladder Item Normal Content Only the address will be displayed. "＊＊＊＊＊" will be displayed if it’s not input at the symbol, and the address is not assigned. (Symbol assigning method⇒ refer to the page 5-27) If the symbol is setup, the symbol will be displayed. Also, all address inputs are executed Symbol with the symbol.
PAGE 104
Chapter 5 Menu Operation (Display) ■ Select Monitoring Display Type (Program : Ladder) (1) Function Assign (select) the monitor type during the monitor at the ladder window. Item Content Select the display type (simple display /detail display) of the application instruction. ◎Simple Display Only the current value will be displayed at the register of the application instruction.
PAGE 105
Chapter 5 Menu Operation (Display) (2) Operation content ① Click [Display]-[Changes Type of Monitor] of the menu bar of the program：ladder ⇒ [Setup Monitor Display Mode] dialog box will be displayed. ② Select type of monitor display mode. Select from either "Simple Display" or "Detail Display." ② ③ Select type of register display mode Select from "HEX" (hexadecimal notation), ③ "DCML" (decimal notation),"OCT" (octal notation).
PAGE 106
Chapter 5 Menu Operation (Display) ■ Word Wrap ・Program：Ladder Note: You cannot edit the program when it is word-wrapped. (1) Function Display a ladder wrapped when it is longer than the width of the ladder window in operation. (2) Operation Click [Display]-[folding]-[On] in the menu bar of the program:ladder. ⇒ Display the ladder program wrapped.
PAGE 107
Chapter 5 Menu Operation (Display) ■ Data List (Program) (1) Function Display/print the using-condition chart of the relay, timer･counter, register and label. ・The data list at the [Program : Ladder] window will be automatically changed to mnemonic before the display. As a result, the circuit of the ladder program must be normal in order to display the data list.
PAGE 108
Chapter 5 Menu Operation (Display) (2) Operation content Explain the menu operation of the [Data List] dialog box. ⇒ Refer to the next page ● [File] menu Item Close Page Setup Print Content Close the data list file that is being displayed. Setup the format of the page for printing the data list. ・If you click [Page Setup], [Setup Print of Data List] dialog box will be displayed. Print the data list. Print Preview Display the image data list as if printing. Setup selection /connection of the printer.
PAGE 109
Chapter 5 Menu Operation (Display) ● [View] menu Item Content Assign the address to be displayed in the data list at the [Assign Address] dialog box. [Assign Address] dialog box will be displayed when this particular item is clicked. Assign Address ・If you click [▼] and select the kinds of register, and click [OK] after inputting the address, the data list of the assign area will be displayed. You can also assign the address by "double click the left side of the mouse" or by inputting the [Enter] key.
PAGE 110
Chapter 5 Menu Operation (Display) (3) Use example ● Ladder Program ← Network number 0 ← Network number 1 ← Network number 2 ← Network number 3 [Note] 1 comment line is 1 program address and 1 network.
PAGE 111
Chapter 5 Menu Operation (Display) ■ Arrange Ladder Diagram (Program : Ladder) (1) Function You can optimize the following: the connection of the disconnected circuit of the created ladder circuit, adjustment of the display position of the output instruction (OUT instruction, /application instruction etc), re-arrangement of the MCS/JCS condition display,re-arrangement of the ladder diagram’s layout. Item Content Connection of Re-connect the disconnected circuit.
PAGE 112
Chapter 5 Menu Operation (Display) ■ Displays in Symbol/ Displays in Comment/ Displays in Symbol & Comment (Program/Mnemonics) Change the display of symbol/comment. Item Content Add Symbol Display symbol Add Comment Display comment Add Symbol Comment Display symbol and comment at the same time.
PAGE 113
Chapter 5 Menu Operation (Display) ■ Displays in Byte /Displays in Word /Displays in Double Word (System/Data/Parameter) Select the display of data (Byte/Word/Double word). Item Content Displays in Byte Displays data in byte module. Displays in Word Displays data in word module. Displays in Double Word Displays data in double word module.
PAGE 114
Chapter 5 Menu Operation (Display) ■ Displays in Detail /Displays as a List (System/Data) Select the display of data from the detail or list. Menu item Content Detail Display Displays in one row, and symbol /comment is also displayed by the window. Displays in List Displays maximum data that can be displayed in the window in several rows.
PAGE 115
Chapter 5 Menu Operation (Setup) 5-6 Setup (Main/Program/System/Data/Symbol/Parameter) If you click [Setup] by the menu bar at each window, [Setup] menu summy will be displayed.
PAGE 116
Chapter 5 Menu Operation (Setup) ■ Select Memory Capacity (Main/Program/System/Data/Symbol/Parameter) (1) Function Setup the volume of the program memory. ・Setup the memory volume of the PC model which has been setup. (2) Operation content If you click [Memory Capacity Setup] by the [Setup] menu, [Select Memory Capacity] dialog box will be displayed. ① ② (In case of JW-100CUH) ① Click [▼] ⇒ Display the possible (for setup) memory volume summary of the model which has already been setup.
PAGE 117
Chapter 5 Menu Operation (Setup) ■ Setup Communication (Main/Program/System/Data/Symbol/Parameter) [1] Function Setup the PC which will be the object of communication, or setup the communication port of the personal computer. Communication object PC itself Network Remote I/O Modem Ethernet Operation Method Operate the PC by connecting the unit between the personal computer and the PC with the communication adapter（JW-100SA）and connection cable.
PAGE 118
Chapter 5 Menu Operation (Setup) (2) In case of network connection (① to ④ ⇒ corresponding to page 5-48) ① Click [Network] ② Set up the communication port and timeout duration of the personal computer. ③ Click [Setup in Detail] ⇒ [Setup in Detail] dialog box will be displayed.
PAGE 119
Chapter 5 Menu Operation (Setup) (3) In case of remote I/O connection (①∼④ ⇒ corresponding to page 5-48) ① Click [Remote I/O] ② Set up the communication port and timeout duration of the personal computer. (The "setup detail" of ③ is not necessary) ④ Click [OK] ⇒ The setup will be completed.
PAGE 120
Chapter 5 Menu Operation (Setup) (4) In case of modem connection (①∼④ ⇒ corresponding to page 5-48) ① Click [Modem] ② Set up the communication port and timeout duration of the personal computer. ③ Click [Setup in Detail] ⇒ [Communication Setup] dialog box will be displayed. Operation Item Operation content Contact Input the name of company/person you will communicate, if necessary. TEL Number Input the telephone number of company/person/computer you will communicate. If you are using PBX (e.g.
PAGE 121
Chapter 5 Menu Operation (Setup) Operation Item Operation content Time Out Times Set up the duration of communication timeout between the modem and JW-100SP. The timeout duration varies, depending on conditions of the personal computer and the telephone line. Set it up according to the situation. Telephone circuit Setup Network Select the type of your telephone line (pulse or tone). Refer to "Network Connection." If you connect a new modem, set up the modem itself first.
PAGE 122
Chapter 5 Menu Operation (Setup) (5) In case of Ethernet connection (①∼④ ⇒ corresponding to page 5-48) ① Click [Ethernet] (You do not have to use the communication port of ②. Its setting is disabled.) ③ Click [Setup in Detail]. ⇒ [Communication Setup] dialog box will be displayed. Operation Item Operation content IP Address Specify the IP address set in the contact unit. Port No Specify the port number set in the contact unit. Protocol Specify the protocol set in the contact unit.
PAGE 123
Chapter 5 Menu Operation (Setup) ■ Memory Clear (Program/System/Data/Symbol/Parameter) (1) Function Initialize files(Program/System/Data/Symbol/Parameter) you are editing with this software. (2) Operation content If you click [Memory Clear] at the [Setup] menu, [Memory Clear] dialog box will be dis played. ① ② ① Assign the object of "memory clear." Click the check box of program memory, system memory, data memory, symbol/comment , parameter, and assign.
PAGE 124
Chapter 5 Menu Operation (Setup) ■ Setup Input Type (Program : Ladder) (1) Function Setup the input mode at the time of creating a program, serial input of address input, double click, enlarge/contract of the application instruction frame. Operation Content Operation Item Select "direct input" or "dialog input.
PAGE 125
Chapter 5 Menu Operation (Setup) (2) Operation content If you click [Setup Input Type] by the [Setup] menu, [Setup Input Type] dialog box will be displayed. ・Select "Input Mode," "Serial Input of Address", "Double Click," "Widen /Narrow Application Instruction’s Frame" at each check box. ■ Setup Display (Program : Ladder) (1) Function Assign the display position of the coil (OUT instruction), TMR /CNT instruction, application instruction.
PAGE 126
Chapter 5 Menu Operation (Setup) (2) Operation content If you click [Setup Display Pattern] at the [Setup] menu, [Setup Display Pattern] dialog box will be displayed. ・Select either ""Display" or "Align" at each check box. ・If the "Display" is checked under "Specity Position", input the row number (0 to 61). ・If you click the [Exchange] button of "Symbol," "Comment,"or "Program Address" under the Character Color, the [Select of Colors] dialog box will be displayed.
PAGE 127
Chapter 5 Menu Operation (Setup) ■ Check Input of Same Symbol (symbol) (1) Function If there is the same symbol at the different data memory address when registering the symbol, select either do /undo for "check input of same symbol." (2) Operation content If you click [Check Input’s of Same Symbol] by the [Setup] menu, [Check Input of Same Symbol] dialog box will be displayed. Select from the check box of "Check Input of Same Symbol.
PAGE 128
Chapter 5 Menu Operation (PC) 5-7 PC (Main/Program/System/Data/Symbol/Parameter) If you click [PC] by the menu bar of each window, [PC] menu summary will be displayed. (Details in pages) 5-59 5-62 5-62 5-69 5-72 ■ PC Transfer (Main/Program/System/Data/Symbol/Parameter) If you click [PC Transfer] by the [PC] menu, [PC Transfer] menu will be displayed. (1) Function Transfer (write /read /verify) the program, etc, with the connected PC. Item Content Write Write data of the program, etc to the PC.
PAGE 129
Chapter 5 Menu Operation (PC) (2) Operation content If you click [Write], [Read] or [Verify] by the [PC Transfer] menu, [PC Transfer] dialog box will be displayed. Dialog box when writing ② ① You cannot select in case of "Verify". ③ ① Assign the Target of PC transfer If you click the check button of program memory, system memory, data memory, symbol/comment, parameter, they become the targets of PC transfer. ・You cannot select symbol/comment in case of [Verify].
PAGE 130
Chapter 5 Menu Operation (PC) ③ Click [OK] ⇒ Start the PC transfer of the assigned object. ・If the object is the "data memory," [Select File] dialog box will be displayed before the transfer, and you can assign the file number of the object of transfer. ・You can observe the progression of transfer in the transfer dialog box.
PAGE 131
Chapter 5 Menu Operation (PC) ■ Run /Stop (Main/Program/System/Data/Symbol/Parameter) (1) Function Run /stop the connected PC. ・Check automatically the run /stop condition of the PC, and when the PC is "running," it stops, and when the main PC is "stopping," it runs. (2) Operation content Click [Start /Stop] by the [PC] menu of each window. Click here ⇒ When the PC is running /stopping, the following confirmation dialog box will be displayed.
PAGE 132
Chapter 5 Menu Operation (PC) [1] I/O Search (JW50/70/100,JW50H/70H/100H) (1) Function Assign the rack number (the number of basic panel) /slot number and LED check the assigned I/O module. Also, it is possible to LED check the I/O module that corresponds to soon to be assigned data memory address.
PAGE 133
Chapter 5 Menu Operation (PC) [2] Secret (JW10, JW30H, J-board(Z-511J/512J), VME Built-in Controller) If you move the cursor to [Secret] of the [PC Operation] menu, [Secret] menu will be displayed. (1) Function Activate the register /change ,delete, secret ON of the password of the PC. Item Content Register/change Password Register the password that will be used as the secret function at the PC. Also, change the registered password.
PAGE 134
Chapter 5 Menu Operation (PC) ●Secret OFF operation When the PC is under the secret ON condition, you need to release the secret ON (secret OFF) to do processing with the PC. Input the registered password when the following dialog box asking to input the password for starting the communication with the PC is displayed. If you input the password, the secret will be released, and it will remain under the secret OFF condition until it will be activated (secret ON).
PAGE 135
Chapter 5 Menu Operation (PC) [4] Parity Check (JW20/20H, J-board(Z-311J/312J/313J), JW50/70/100, JW50H/70H/100H, W100, W70H/100H, W16/51) (1) Function Execute the parity check of the connected PC, and confirm "yes/no" of the error. (2) Operation content ① ① Click [Parity Check] ⇒ The [Parity Check] dialog box will be displayed. Display chart of the error address ② ② Click [Exec.] ⇒ The parity check will be executed (started).
PAGE 136
Chapter 5 Menu Operation (PC) [5] EEPROM (JW20/20H, JW50/70/100, JW50H/70H/100H, JW30H, JW10, J-board, VME Built-in Controller) If you move the cursor to the [EEPROM] of the [PC Operation] menu, [EEPROM] menu will be displayed. (1) Function Activate the prepared EEPROM (in case of JW30H, flash ROM) and read/write to the connected PC. (2) Operation content ① ② ① Read from EEPROM 1. Click [Read from EEPROM] ⇒ The confirmation dialog box for "reading" will be displayed. 2.
PAGE 137
Chapter 5 Menu Operation (PC) [6] I/O Table Automatic Registration (JW20/20H, JW30H, J-board, VME Built-in Controller) Read I/O register and registered I/O table information of the connected PC. If you move the cursor to [I/O Table] of the [PC Operation] menu, [I/O Table] menu will be displayed. (1) Function Automatically register the I/O table of the connected PC. (2) Operation ① ① Click [I/O Table Automatic Registration]. ⇒ The dialog box confirming creation of the I/O table is displayed.
PAGE 138
Chapter 5 Menu Operation (PC) ■ PC Monitor (Main/System/Data/Symbol/Parameter) If you move the cursor to [PC Monitor] of the [PC] menu, [PC Monitor] menu will be displayed. [1] [2] [3] [1] Error Monitor (1) Function Monitor abnormal information of the connected PC. ・The monitor contents include: abnormal content, current condition, occurrence time, and the number of occurred error. ・You can also clear the abnormal history that is stored in the PC.
PAGE 139
Chapter 5 Menu Operation (PC) [2] Scan Time Monitor (1) Function Monitor the scan time of the connected PC. ・The monitor contents include: maximum value, minimum value, and current value. (2) Operation content ① ① Click [Scan Time Monitor] ⇒ The [Scan Time] dialog box will be displayed. ② ② Click [OK] ⇒ The [Scan Time] dialog box will close.
PAGE 140
Chapter 5 Menu Operation (PC) [3] Clock Monitor (1) Function Monitor the internal clock to the connected PC. ・ display /setup the date and time. ・ You can not "clock monitor" in the PC model that does not carry the clock function. (2) Operation content ① ① Click [Clock Monitor] ⇒ The [Clock Monitor] dialog box will be displayed, and you can monitor the date/time. ② 1 ● In case of setting up date/time 1. Click [Setup] ⇒ [Setup Clock] dialog box will be displayed. 2 ※ 3 2.
PAGE 141
Chapter 5 Menu Operation (PC) ■ Modem Connection (JW50/70/100, JW50H/70H/100H, W70/100H) (1) Function Connect to the network module through the modem. (2) Content 1 2 Note: Before connecting the modem, set up the modem by selecting [Setup]-[Communication Setup]. (Refer to page 5-51) 1. Connection Call the telephone number you set by selecting [Setup]-[Communication Setup]. After the connection, you can operate just like when connecting to the network.
PAGE 142
Chapter 5 Menu Operation (Window) 5-8 Tool (Main/Program/Symbol/Data/System/Parameter) ・ Main/Program:Mnemonics/System/Data/Symbol/Parameter ・Program:Ladder ■ Library (Program:Ladder) You can create the library, read the file, or save the file in the Library window. ● Library Item Display Content Read If you click [Library]-[Read], the Library window will be displayed. If you click [File]-[Read] in the Library window, the [Read Library File] dialog box will be displayed.
PAGE 143
Chapter 5 Menu Operation (Window) ■ CAD interface (Program : Ladder) This mode is used to transfer data between the system and a host computer (such as a CAD system). First, the system converts programs and/or the symbol comments into character strings. Then it transfers them through an RS-232C interface or a floppy (hard) disk based on the settings of the communication parameters. For details about the communication format, see the instruction manual for the CAD interface.
PAGE 144
Chapter 5 Menu Operation (Window) (3) Read/write a ladder program Select either "Reading Ladder diagram" or "Writing Ladder diagram" on the "Process" item. When you select "Reading Ladder diagram," the system will read the ladder diagram from a CAD system or a floppy (hard) disk. When you select the "Writing Ladder diagram," the system will write the ladder diagram to the CAD system or the floppy (hard) disk.
PAGE 145
Chapter 5 Menu Operation (Window) 5-9 Window (Program/System/Data/Symbol/Parameter) If you click [Window] by the menu bar of each window, the [Window] menu will be displayed. At the [Window] menu, you can operate the display method of several windows. (Details in pages) 5-77 5-78 5-79 5-80 5-81 ※ The above display is the case when the project name is "abc.
PAGE 146
Chapter 5 Menu Operation (Window) ■ Open New Window (Program/System/Data/Symbol/Parameter) (1) Function Open an another window that display the same content as the active window. ・ You can open several windows for a file, and you can also display parts of the file to each window. ・ If you modify the content of the file in a window, all the windows that display the file will reflect the change. However, in the program (ladder/mnemonic) window, the change will be reflected after the modification.
PAGE 147
Chapter 5 Menu Operation (Window) ■ Overlap Display (Program/System/Data/Symbol/Parameter) (1) Function Display several windows in a pile. (2) Operation content ⇒ If you click [Overlap Display Arrange], several windows will be displayed in pile. ・The active window will be displayed in the front.
PAGE 148
Chapter 5 Menu Operation (Window) ■ Cascade Display (Program/System/Data/Symbol/Parameter) (1) Function Display several windows in a row. (2) Operation content ⇒ If you click [Display in Row], several windows will be displayed in a row.
PAGE 149
Chapter 5 Menu Operation (Window) ■ Arrange Icons (Program/System/Data/Symbol/Parameter) (1) Function Arrange icon at the below of the window. (2) Operation content ⇒ If you click [Arrange Icons], the icons will be arranged. (Display example) ・Iconized windows will be arranged at the bottom of the main window. ・If the basic window is open, and that this window is at the bottom of the main window, you can not see the icon under this window.
PAGE 150
Chapter 5 Menu Operation (Window) ■ Window Name 1,2,… (1) Function Display the assigned window. ・The list of currently open basic window will be displayed at the below of the [Window] menu. ・A check mark will be displayed besides the name of currently active basic window. The list of currently open basic window Check mark (2) Operation content Click the window name [1,2,… ] of the [Window] menu. ⇒ The assigned window will be displayed. ・If more than 10 windows are open, [More Windows] will be displayed.
PAGE 151
Chapter 5 Menu Operation (Help) 5-10 Help (Main/Program/System/Data/Symbol/Parameter) If you click [Help] from the menu bar of each window, the [Help] menu will be displayed. ■ Find Topic (1) Function Display help on the assigned item by the table of “contents /keyword”. (2) Operation content ⇒ If you click [Find Topic], [Find Topic] dialog box will be displayed. ● Display at the time of selecting “Contents”. ● Display at the time of selectin “Index”.
PAGE 152
Chapter 5 Menu Operation (Help) ■ Version Data (1) Function Display the version information of JW-100SP. (2) Operation content ⇒ If you click [Version Data (MMVIEW)], the [Version Data (JW-100SP)] dialog box will be displayed.
PAGE 153
Chapter 6 Program Edit (Ladder Programming) Chapter 6 Program Edit There are two ways of creating a program: ladder and mnemonic. Also, there are two ways to input a ladder program: direct input and dialog input. Direct input Ladder program Dialog input Program Mnemonic program 6-1 Ladder Programming ■ [Program：：Ladder] window When creating a new program, or when opening a program that is saved in a file, the [Program : Ladder] window will be displayed.
PAGE 154
Chapter 6 Program Edit (Ladder Programming) ■ Select Address Display Type Choose the display type of the ladder program from: Normal (Address) Display, Symbol Display, Comment Display (8c. 4r), Comment Display (16c, 2r) or Full Display (Address/Symbol/Comment). ◎ Normal (Address) Display ・Display the address (relay address or register address). ・In case the address was not assigned when creating a program by the symbol, "*****" will be displayed at the address part.
PAGE 155
Chapter 6 Program Edit (Ladder Programming) ◎ Comment Display (16 characters, 2 lines) ・Display the address (relay address or register address) and the comment (28 characters) within two lines, each of which can contain 16 characters. ・Comments are not shown if you do not register any comments. ・You cannot input, modify or delete the comments of application instruction, which is specific to JW-100SP.
PAGE 156
Chapter 6 Program Edit (Ladder Programming) ■ Program Input Method There are two types of input methods of the ladder program: direct input and dialog input. To change between the input mode, use [Setup]-[Setup Input Type] of the menu bar. (For details on the setup input type, refer to the page 6-16) 【Input Mode】 Select either dialog input /direct input. □ Inputs at Display Directry. It becomes the direct input mode. □ Inputs Using Dialog It becomes the dialog input mode.
PAGE 157
Chapter 6 Program Edit (Ladder Programming) Input method of instruction and the initial value of instruction cursor at the time of the input Toolbar Button Instruction Menu Key assigned by default A contact [S] B contact [D] Horizontal line [F] Vertical line [G] OUT [X] TMR [V] CNT [C] FUN [B] F43 [H] F44 [J] F45 [K] Instruction Cursor Initial Value (1)-1 The input order by the toolbar button. 1. Select the instruction of the toolbar by the mouse cursor.
PAGE 158
Chapter 6 Program Edit (Ladder Programming) (1) -3 Input order by the Assigned key 1. When the mouse cursor is the arrow-shaped cursor, move the cell cursor to the position where you input the instruction.If the mouse cursor is the instruction cursor, change the instruction cursor to the arrow-shaped cursor by clicking the right side of the mouse or use the [ESC] key, or button. 2. If you press the assigned key, the instruction will be input.
PAGE 159
Chapter 6 Program Edit (Ladder Programming) (2) Input Address ・When inputting the instruction by the direct input mode, the relay address, register address, application instruction number, etc. will be setup at the initial value so that you need to modify them with the correct value. ・To change from the instruction input mode to the address input mode, select the instruction cell by the arrow-shaped cursor, and use "double click" or the [Enter] key.
PAGE 160
Chapter 6 Program Edit (Ladder Programming) ● In case of inputting the symbol ・When the display type is Symbol/Full(Address/Symbol/Comment). (Refer to the page 6-2) ・Input the symbol within 16 characters. ・There are two methods of creating a program by the symbol input. ① Create a program using the symbol that has already been registered at the [Symbol] window. ② After creating a program by using the un-registered symbol, assign the address at the [Assign Symbol] window .
PAGE 161
Chapter 6 Program Edit (Ladder Programming) [2] Dialog Input Mode If an instruction is selected, the dialog input mode display the dialog box where the relay address and the register address are input. In this mode, you can change between address /symbol input, change between application instruction indirect /direct register, and the setup of the register area setup at the dialog box, according to the each instruction. (1) Input Instruction ・There are four types of instruction input methods.
PAGE 162
Chapter 6 Program Edit (Ladder Programming) (1)- 2 Input order of basic instruction (horizontal line, vertical line) 1. Move the cell cursor to the position where you input the instruction (horizontal line, vertical line). 2. If you select instruction (horizontal line vertical line) from the toolbar for editing ladder, the [Instruction] menu and the assigned key, horizontal line /vertical line will be input. (1) - 3 Input order of basic instruction (TMR, CNT) 1.
PAGE 163
Chapter 6 Program Edit (Ladder Programming) (1)- 4 Input order of application instruction 1 (In case of selecting the instruction at the dialog) 1. Move the cell cursor to the position where you input the instruction. 2. Select instruction (FUN) from the toolbar for editing ladder, the [Instruction] menu and the assigned key. 3.
PAGE 164
Chapter 6 Program Edit (Ladder Programming) 7． For the instruction that has been setup with the constant, input the constant by the numerical value key. 8． If you click [OK] button, the instruction will be input. (1)-5 Input order of application instruction 2 (In case of selecting the instruction by the tree bar.) 1. Move the cursor to the position where you input the instruction. 2. At the tree bar, the application instruction is classified according to the function.
PAGE 165
Chapter 6 Program Edit (Ladder Programming) ● In case of inputting the symbol ・Input the symbol within 16 characters. ・There are two methods of creating a program by the symbol input. ① Create a program using the symbol that has already been registered at the [Symbol] window. ② After creating a program by using the un-registered symbol, assign the address at the [Assign Symbol] window. 6. For the instruction that has been setup with the constant, input the constant by the numerical value key. 7.
PAGE 166
Chapter 6 Program Edit (Ladder Programming) (2) Input Address ・When inputting the instruction in the dialog input mode, you normally input the relay address, register address, application instruction number, etc. at the dialog box, but in case you want to modify the once setup address, change the instruction input mode to the address input mode.
PAGE 167
Chapter 6 Program Edit (Ladder Programming) ● In case of inputting the symbol ・When the display type is Symbol/Full (Address/Symbol/Comment). (Refer to the page 6-2) ・Input the symbol within 16 characters. ・There are two methods of creating a program by the symbol input. ① Create a program using the symbol that has already been registered at the [Symbol] window. ② After creating a program by using the un-registered symbol, assign the address at the [Assign Symbol] window .
PAGE 168
Chapter 6 Program Edit (Ladder Programming) ■ Setup Input Type Click [Setup]-[Setup Input Type] of the menu bar, and display the [Setup Input Type] dialog box. 【Input Mode】】 Select either dialog input /direct input □ Inputs at Display Directry It becomes the direct input mode. □ Inputs Using Dialog It becomes the dialog input mode.
PAGE 169
Chapter 6 Program Edit (Ladder Programming) ・If you double click the mouse on the cell displaying the application instruction number, the display will change to the following in order. (The change differs according to the PC model.) F-XXX→F-XXXw→F-XXXd→FcXXX→FxXXX→FcXXXw→FxXXXw The application instruction number does not change, however. ・In the direct input mode, if you double click the mouse on the cell which is not displaying anything , the display will change to the following in order.
PAGE 170
Chapter 6 Program Edit (Ladder Programming) ■ Edit Circuit [1] Over Write /Insert Mode It's the mode when the another element was written over on the cell where the instruction (element) such as A or B contact exist already. The movement is the same on the cell where the element is not written. Over write mode : Write over with a new element. (refer to the next paragraph) Insert mode : Insert the new element. There are two types of inserts : insert left and insert right.
PAGE 171
Chapter 6 Program Edit (Ladder Programming) (Example 3) Modify the Fc210 (ADD) instruction to F-63 (INC) instruction ・In the direct input mode, the application instruction number, the register number and the constant become the initial values, so that you need to modify them after the instruction input. (2) Delete instruction 1( button : eraser, or use the [Delete] key) ・ button (eraser) is used to delete the instruction by the cell module. ・It is useful for deleting the vertical line (OR line), etc.
PAGE 172
Chapter 6 Program Edit (Ladder Programming) (3) Delete instruction 2 (use the [Delete Cell] command) ・If you use the [Delete Cell] command, you can delete several cells in the horizontal direction (column direction) in batch. ・The area where you have deleted the cells becomes blank. ● Operation order 1． Move the cell cursor to the cell that is to be deleted. 2．If you are deleting several cells, simply drag them. 3． If you click [Edit]-[Delete Cell] of the menu bar, the instruction cell will be deleted.
PAGE 173
Chapter 6 Program Edit (Ladder Programming) (5) Insert instruction 2 (use [Insert Cell] command) ・If you use the [Insert Cell] command, you can delete several cells in the horizontal direction (column direction) in batch. ・The cells on the right of the inserted position move right in the number of inserted cell columns. ● Operation order 1. Move the cell cursor to the cell where you insert the instruction. 2. If you are inserting several cells, simply drag them. 3.
PAGE 174
Chapter 6 Program Edit (Ladder Programming) [3] Delete Circuit Use the [Delete Row] command when you are deleting by the circuit (network) module. ● Operation order 1． Drag the line number of the circuit that is to be deleted. 2．If you click [Edit]-[Delete Row] of the menu bar, the circuit will be deleted. ・In case of canceling the deletion, click [Edit]-[Undo] of the menu bar. [4] Insert Circuit Use [Insert Row] command when inserting the circuit (network). ● Operation order 1.
PAGE 175
Chapter 6 Program Edit (Ladder Programming) [5] Copy Circuit Use [Copy], [Paste] command when copying the circuit (network). ● Operation order 1. Drag the line number of the circuit which is to be copied. 2. If you click [Edit]-[Copy] of the menu bar, the circuit which is to be copied will be momentarily saved. 3. Click the row number of the destination of the copy. 4. If you click [Edit]-[Paste] of the menu bar, the "copy circuit" will be completed.
PAGE 176
Chapter 6 Program Edit (Ladder Programming) [6] Move Circuit Use [Insert Row], [Cut], [Paste], [Delete Row] commands when moving the circuit (network). ● Operation order 1. Drag only the amount of lines of the moving circuit from the line number of the moving destination. 2. If you click [Edit]-[Insert Row] of the menu bar, and empty line will be inserted. 3. Drag the row number of the moving circuit.
PAGE 177
Chapter 6 Program Edit (Ladder Programming) 4. If you click [Edit]-[Cut] of the menu bar, the moving circuit will be deleted, and it will be momentarily saved. 5. Click the row number of the moving destination. 6. If you click [Edit]-[Paste] of the menu bar, the circuit which was cut at No.4.will be pasted. 7.
PAGE 178
Chapter 6 Program Edit (Ladder Programming) ■ Library By registering the created programs in the library file, you can create a similar ladder circuit easily. [1] Register to Library Register the circuit created at the [Program : Ladder] window to the library file. ● Operation order 1. Select by dragging the line number of the circuit which is to be registered. 2. Click [Tool]-[Library]-[Register] of the menu bar. ⇒The [Register library] window will be opened, and the circuit selected at No.1.
PAGE 179
Chapter 6 Program Edit (Ladder Programming) ■ Menu Bar Menu Command Read File Edit Save As Save with a new name. Used at the [Read from library] window. Save with the current file name. Quit Quit the library register or the reading. Undo Cancel the operation that has just been executed. Cut Cut the selected area and saves it momentarily. Copy Copy the selected area and saves it momentarily. Paste Paste the cut or copied data to the cursor position.
PAGE 180
Chapter 6 Program Edit (Ladder Programming) ■ Main Toolbar ◎Read Same as [File]-[Read] ◎Save Same as [File]-[Save] ◎Insert Same as [Insert]-[Insert] ◎ Cut Same as [Edit]-[Cut] ◎Copy Same as [Edit]-[Copy] ◎Paste Same as [Edit]-[Paste] ◎Undo Same as [Edit]-[Undo] ◎Find Same as [Edit]-[Find] ◎Arrange ladder diagram Same as [Display]- ◎Version Information Same as [Help][Version Information of Library] (Refer to the previous page) [Arrange Ladder Diagram] ■ Toolbar for Editing Ladder Same
PAGE 181
Chapter 6 Program Edit (Ladder Programming) (1) Edit ladder circuit At the [Register Library] window, you can edit the ladder circuit in the same way as the [Program : Ladder] window, but there are following exceptions.
PAGE 182
Chapter 6 Program Edit (Ladder Programming) ● Modifying method of increase /decrease value Depends of the setup of [Double Click] of [Setup]-[Setup Input Type] of the menu bar, the modifying method of increase /decrease value becomes different. ・In case of setting up "Becomes address input." If you double click the arrow-shaped cursor at the increase /decrease value position, the increase /decrease value input mode will be set. ・In case of setting up "Changes instruction at cell.
PAGE 183
Chapter 6 Program Edit (Ladder Programming) [2] Read from Library Read out the ladder circuit that was registered at the library to the [Program : Ladder] window. ● Operation order 1. Move the cell cursor to the position where you are reading out the circuit that has been registered at the library. 2. Click [Tool]-[Library]-[Read] of the menu bar. ⇒ The [Read from Library] window will be opened. At this time, the ladder display area is being cleared.
PAGE 184
Chapter 6 Program Edit (Ladder Programming) 3. Click [File]-[Read] of the menu bar when reading out the library file that has already been saved. ⇒ [Read from library file] dialog box will be displayed. 4. Select the reading file name, and click [Open] button. Only file that you can read is the file with the extension lb2. ⇒ The ladder circuit that has been saved in the library file will be displayed.
PAGE 185
Chapter 6 Program Edit (Ladder Programming) (1) Edit ladder circuit The editing method of the ladder circuit at the [Read from Library] window is same as the [Register library] window. Refer to the page 6-29. (2) Setup increase /decrease value The setup method of the increase /decrease value at the [Read from Library] window is same as the [Register library] window. Refer to the pages 6-29 to 30.
PAGE 186
Chapter 6 Program Edit (Ladder Programming) 2. Assign the reading position. □ Insert to Cursor Position. Read out to the row that contains the cell cursor of the [Program : Ladder] window. □ Insert to Assigned Row. Read out to the assigned row of the [Program : Ladder] window. 3. When there is a ladder circuit on the assigned line of the [Program : Ladder] window, select either "over write" on the ladder circuit, or "insert" in front of the ladder circuit. 4.
PAGE 187
Chapter 6 Program Edit (Ladder Programming) ■ Arrange Ladder Diagram You can adjust the display position of the output instruction (OUT instruction, /application instruction, etc...) which was created at the [Program : Ladder] window, or you can execute the automatic connection of the disconnected circuit or optimization of the ladder. ● Operation order 1. Display the ladder circuit at the [Program: Ladder] window. 2. Click [Display]-[Arrange Ladder Diagram] of the menu bar.
PAGE 188
Chapter 6 Program Edit (Ladder Programming) 【Display Position】】 Assign the display position of the coil (OUT instruction) □ Align display The coil display position is set according to the screen size. When the setup of the next clause 【Align position 】is "Align left," the 4 th cell from the right of the screen become the display position of the coil. And when the setup is "Align right," the first cell from the right of the screen will become the display position of the coil.
PAGE 189
Chapter 6 Program Edit (Ladder Programming) (3) Re-arranglment of MCS, JCS condition's display Check the area where the condition of MCS (F-30) and JCS (F-41) is valid, and display "M" (MCS), "J" (JCS) to the line number of the valid area. Example 1) Using MCS Example 2) Using JCS Nesting level Nesting level "J" mark "M" mark (4) Re-arrangement of ladder diagram's layout Omit unnecessary horizontal lines, and gather the ladder elements towards left.
PAGE 190
Chapter 6 Program Edit (Ladder Programming) ■ Converting Ladder to Mnemonic Change the ladder diagram created at the [Program : Ladder] window to the mnemonic. Converting Ladder to the Mnemonic is taken place in the following timing. ① When transferring the program to the PC (right before the transfer). ② When saving the program in the file (right before the saving). ③ When clicking the button of the toolbar for editing ladder.
PAGE 191
Chapter 6 Program Edit (Ladder Programming) Notes If there is a ladder circuit (disconnected line, etc.) that can not be changed to the mnemonic when converting ladder to mnemonic, an error message (compile error) will be displayed, and this particular ladder program will not be changed to the mnemonic. In this case, the transfer to the PC or the printing will not take place, however, the saving in the file will take place.
PAGE 192
Chapter 6 Program Edit (Ladder Programming) ■ Optimization of Ladder You can draw freely the ladder diagram in the ladder diagram display area, but when this freely drawn ladder diagram is modified to be looked better, the ladder is said to be "optimized." [1] Circuit by the Optimization If you execute the optimization, the ladder diagram will become the following. ① All contacts will be crammed at upper and at the left side, and unnecessary horizontal lines・ vertical lines will be deleted.
PAGE 193
Chapter 6 Program Edit (Ladder Programming) [2] Optimization Timing The ladder optimization is executed at the time of "converting mnemonic to ladder." Therefore, follow the following order when you are displaying the optimized ladder diagram which had been already been created . ① Create ladder drawing at the [Program : Ladder] window.
PAGE 194
Chapter 6 Program Edit (Mnemonic Programming) 6-2 Mnemonic programming ■ [Program : Mnemonic] window If you click [Display]-[Change Display] of the menu bar when the [Program : Ladder] window is being displayed, the [Program : Mnemonic] window will be displayed. Program address Mnemonic Symbol Toolbar for editing mnemonic ・The symbol which was registered at the [Symbol] window (the same file name as the [Program : Mnemonic] window) will be displayed.
PAGE 195
Chapter 6 Program Edit (Mnemonic Programming) ・If you click the button or the [F1] key after inputting TMR /CNT instructions, the display will change to the following order. TMR → DTMR (BCD) → DTMR (BIN) → UTMR (BCD) → UTMR (BIN) CNT → DCNT (BCD) → DCNT (BIN) → UCNT (BCD) → UCNT (BIN) ・If you input an instruction, the spot where numerical values such as relay or register number, timer /counter number and application instruction number will be waiting for the input. 3.
PAGE 196
Chapter 6 Program Edit (Mnemonic Programming) ■ Converting Mnemonic to Ladder Convert the mnemonic program that was created at the [Program : Mnemonic] window to the ladder diagram. Converting mnemonic to ladder is executed in the following timings. ① At the time of transferring the program from the PC (right after the transfer) ② At the time of reading the program from the file (right after the reading) ③ When clicking the button of the toolbar for editing mnemonic.
PAGE 197
Chapter 6 Program Edit (Mnemonic Programming) Notes If there is a mnemonic program that can not be changed to the ladder when converting mnemonic to ladder, an error message (compile error) will be displayed, and the mnemonic program will not be changed to the ladder. However, when you transfer the program from the PC, or reading the program from the file, it will be changed to the ladder (abnormal ladder).
PAGE 198
Chapter 6 Program Edit (Notes When Editing Program) 6-3 Notes When Editing Program ■ Notes for Editing Programs in Several Windows. You can read several parts of the ladder diagram at the same time when you open several windows by the program of the same name. You can edit easily, for example, the "copy circuit" by looking at the two windows. However, the editing result from the active window will be reflected to an another window when you change (when you press the button, etc...
PAGE 199
Chapter 6 Program Edit (Notes When Editing Program) 3. Edit the program at the [Program: Ladder] window. At this moment, the editing result will not be reflected to the other window. Delete Not deleted Not deleted 4. If you click the button of the toolbar for editing ladder when the edited [Program: Ladder] window is active, the editing result will be reflected to the other window.
PAGE 200
Chapter 7 Setup Each Data (Setup System Memory) Chapter 7 Setup Each Data The setup of system memory,data memory,parameter,symbol/comment will be explained. 7-1 Setup System Memory ■ Summary Display/Operation of the System Memory At the system memory window, the address/data/comment of the system memory will be displayed. Address chart Data chart Comment chart ・To edit the data, locate the area with the scroll bar, click the data cell, push the [Enter] key, and input the numerical value.
PAGE 201
Chapter 7 Setup Each Data (Setup System Memory) ■ Setup/Display of Property Sheet Setup/display the system memory by the property sheet type. The property sheet will be displayed when you click [Property Sheet] of the tree bar. Depends on the PC model, the setup item/content will be different.
PAGE 202
Chapter 7 Setup Each Data (Setup System Memory) ■ Manual I/O Registration (JW50/70/100,JW50H/70H/100H) In case of JW50/70/100 and JW50H/70H/100H, you can setup the kind/points of the module that is to be put on each rack/slot when using the JW input/output module. You can do the setup at the displaying [Manual I/O Registration] dialog box after clicking the [Manual I/O Registration] of the tree bar.
PAGE 203
Chapter 7 Setup Each Data (Setup System Memory) ● [Confirmation (Manual I/O Registration)] dialog box Change display Button Confirmation Function Change display Switch the view between racks 0 to 3 and racks 4 to 7. Confirmation Realize the settings in the system memory.
PAGE 204
Chapter 7 Setup Each Data (Setup Data Memory) 7-2 Setup Data Memory ■ Summary Display/Operation of Data Memory At the data memory window, the address/data/symbol/comment of the data memory will be displayed. Address chart Data chart Symbol chart Comment chart Tree (PC model : JW-33CUH1 display) ・Select relay, timer /counter, register, file register by the tree of the tree bar.
PAGE 205
Chapter 7 Setup Each Data (Setup Symbol/Comment) 7-3 Setup Symbol/Comment ■ Summary Display/Operation of Symbol/Comment At the symbol・comment window, the address/symbol/comment of the data memory will be displayed. Address chart Symbol chart Comment chart Tree (PC model : JW-33CUH1 display) ・Select relay, timer/counter, register, file register by the tree of the tree bar.
PAGE 206
Chapter 7 Setup Each Data (Setup Symbol/Comment) ■ Applying Text File You can use the text file (file of the extension txt) as the user file of the symbol/comment. (1) Register to the text file Describe the data memory address, symbol and comment in one line, and they are divided by the tab.
PAGE 207
Chapter 7 Setup Each Data (Setup Parameter) 7-4 Setup Parameter ■ Summary Display/Operation of Parameter In case of the PC model series JW20/JW30H, the parameter of the special I/O module/option module is setup at the parameter window. (In other model series, the parameter window is not used.) At the parameter window, the address and data will be displayed.
PAGE 208
Chapter 7 Setup Each Data (Setup Parameter) ■ Setup Model (Special I/O module/option module) Setup the model of the special I/O module and the option module at each switch number. If you click [Model setup list] of the tree bar, the [Model Setup List] dialog box will be displayed.
PAGE 209
Chapter 7 Setup Each Data (Setup Parameter) ■ Setup/Display of Property Sheet Setup/display the parameter in property sheet type. If you click [Property sheet] of the switch number (special I/O /option) which is to be assigned, the property sheet that was setup at the [Model setup list] will be displayed.
PAGE 210
Chapter 7 Setup Each Data (Setup Option Parameter Tools) 7-5 Setup Option Parameter Tools ■ Display/Settings of Option Parameter Tools For the model that saves parameters in the option module, set the parameters with option parameter tools. ・Select [Tool]-[Option Parameter], and the [Option Parameter tool] windows is displayed. ・Select [File]-[New], and select the type of option module to set the parameters. If you already have a file of option parameters, open it by selecting [File]-[Open].
PAGE 211
Chapter 7 Setup Each Data (Setup Option Parameter Tools) ・In the [Option Parameter Tool] window, the addresses, the data, and the comments are displayed. Address chart Data chart Comment chart (Example for display: Data link master station) ・To edit the data, locate the area with the scroll bar, click the data cell, push the [Enter] key, and input the numerical values. (1) Operation in the area of option parameters You can select one cell with single click.
PAGE 212
Chapter 7 Setup Each Data (Setup Option Parameter Tools) (6) Operation settings of the [PC] menu Item Function Start of Link Start the link operation Stop of Link Stop the link operation Start after writing EEPROM Stat the link operation after writing the parameters into EEPROM in the option module. Writing EEPROM Write the parameters into EEPROM in the option module. Parameter initialization Initialize the parameters in the option module. (7) Start/Stop of the [PC] menu Start or stop the PC.
PAGE 213
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) Chapter 8 Monitor By connecting the PC and the personal computer, you can monitor the ON/OFF condition of the relay, or monitor the current value of the register. Before monitoring, execute the "communication setup" first. (Refer to the page 5-48) If you click [Monitor] of the menu bar at the main/program/system/data/parameter window, the [Monitor] menu summary will be displayed.
PAGE 214
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) Notes ・Before monitoring, read the program from the PC by the PC transfer (Refer to the page 5-59) or write the program to the PC. If the program of both the PC and the personal computer is different, you can not monitor the right calculation. (2) Set/ reset of the relay Set/reset the relay of the cursor position. ● Operation method ① Move the cursor to the relay where you are going to set/ reset. ② Click the right side of the mouse.
PAGE 215
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) [2] Monitor at [Program : Mnemonic] window The [Program : Mnemonic] window is organized by the display area of the address number and the mnemonic. ● Display relay/coil When the circuit is running, a "＊" will be displayed, and when the circuit is not running, a "−" will be displayed. ● Application instruction display Display Content Current Value The current value of the register will be displayed at the right side of the register.
PAGE 216
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) [3] Monitor at the [System] window ● Monitor system memory Data items are renewed by communicating with the PC, and following the assigned monitor type. ● Modify system memory If you double-click the data cell, or select the cell and push the [Enter] key, the item will become the input mode. If you input the [Enter] key after inputting an optional numerical value at the input mode, the system memory value of the PC will be modified.
PAGE 217
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) [4] Monitor at the [Data] window ● Monitor data memory Data items are renewed by communicating with the PC, and following the assigned monitor type. ● Modify current value of the register If you double-click the cell whose register is being monitored, or select the cell and push the [Enter] key, the item will become the input mode.
PAGE 218
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) [5] Monitor at the [Parameter] window ● Monitor parameter Data items are renewed by communicating with the PC, and following the assigned monitor type. ● Modify parameter If you double-click the data cell, or select the cell and push the [Enter] key, the item will become the input mode. If you input the [Enter] key after inputting an optional numerical value at the input mode, the parameter value of the PC will be modified.
PAGE 219
Chapter 8 Monitor (Start Monitoring, Stop Monitoring) [6] Monitor Several Windows at the Same Time You can monitor several windows at the same time. However, you cannot monitor the [Program:Ladder] window and the [Program:Mnemonic] window at the same time. ・Display example ※ Operate start/stop of the monitor by the [Monitor] menu at every window (described above※).
PAGE 220
Chapter 8 Monitor (Multipoints Monitor) 8-2 Multipoints Monitor [1] Function You can monitor manual data in the data memory or system memory (maximum 128 items). (Display example) Data items are renewed by communicating with the PC, and following the assigned monitor type at each row. Item Address Content Register the address to be monitored. ●Input method ・You can input the address to be monitored directly in the address cell.
PAGE 221
Chapter 8 Monitor (Multipoints Monitor) Item Supplement Content Change the display type of the register, and set/reset the timer /counter contact. ●Changing the display type of the register Right-click the cell of the register address, and select the display type in the short cut menu. The numerical value of the data cell of the register address is displayed in the specified display form.
PAGE 222
Chapter 8 Monitor (Multipoints Monitor) ・Sample Operation 2 (To start with the menu bar of the Program:Ladder window) 8・10
PAGE 223
Chapter 8 Monitor (Multipoints Monitor) [2] Menu operation The menu operation of the [Multipoints Monitor] window (cf. page 8-8) is explained. (1) Menu bar (Refer to:) 8-11 8-12 8-13 8-13 8-13 8-14 ■ [File] menu Item Content Open Open an existing file(*.mon) Save Overwrite and save the current file. Save As Save the address registered in the [Multipoints Monitor] window, specifying the filename and the folder. Close the [Multipoints Monitor] window.
PAGE 224
Chapter 8 Monitor (Multipoints Monitor) ■ [Edit] menu Item Cut Content Cut the selected area of the address cell, and save it in the clipboard. Copy Copy the selected area of the address cell, and save it in the clipboard. Paste Paste the data saved in the clipboard. Repeat to forword Register the 15 downward consecutive addresses from the selected cell. Repeat to rewind Register the 15 upward consecutive addresses from the selected cell. Execute [Downward sequence].
PAGE 225
Chapter 8 Monitor (Multipoints Monitor) ■ [Display] menu Item Displays in Byte Content Display the value of system memory, register address, or timer /counter by bytes. Displays in Word Display the value of system memory, register address, or timer /counter by words. Displays in Double Word Tool Bar Display the value of system memory, register address, or timer /counter by double words. Select ON/OFF of the display of the tool bar. Status Bar Select ON/OFF of the display of the status bar.
PAGE 226
Chapter 8 Monitor (Multipoints Monitor) ■ [Help] menu Item Version data Content Display the version of the multipoints monitor.
PAGE 227
Chapter 8 Monitor (Sampling Trace) 8-3 Sampling Trace Sampling trace displays data in PC (e.g. ON/OFF information of relay) in the form of time charts. You can also save or print the displayed data. If you click [Monitor]-[Sampling Trace] (refer to page 8-20) according to the procedure of sampling trace on the next page, sampling trace will start.
PAGE 228
Chapter 8 Monitor (Sampling Trace) [1] Sampling Trace order The order to execute sampling trace will be explained. 1.. Setup PC model ・Setup the compatible PC model by the [Setup]-[Select PC Model] of the menu bar. ・If you start sampling trace in JW-100SP, you cannot change models. (It will be the model in operation with JW-100SP.) 2.. Setup communication Set up communication by selecting [Setup]-[Communication Setup] in the menu bar. 3..
PAGE 229
Chapter 8 Monitor (Sampling Trace) 4.. Setup of trace condition Set up trace memory file, trace memory capacity, sampling frequency, and trigger mode by selecting [Setup]-[Trace Condition Setup]. 5.. Setup of trace data Register the address to be traced in the input module of trace data address.
PAGE 230
Chapter 8 Monitor (Sampling Trace) 6.. Monitor Start If you click [Monitor]-[Sampling Trace] in the menu bar, the [Sampling Trace Process] dialog box will be displayed. If the trigger condition is not satisfied at this time, an arrow points “Wait for trigger” in the dialog box. This state remains until the trigger condition is satisfied. ・When the trigger condition is satisfied, the arrow moves [Tracing]→[Transfer data]→[Convert data] in the [Sampling Trace Process] dialog box.
PAGE 231
Chapter 8 Monitor (Sampling Trace) [2] Menu of the [Sampling Trace] window This subsection explains menu operation of the [Sampling Trace] window (See page 8-15). (1) Menu bar ■ [File] menu Item Content Open Open an existing file(*.smp) of trace data of sampling trace, trigger condition, or trace condition. ・Sampling trace will be executed for the model corresponding to the file you open.
PAGE 232
Chapter 8 Monitor (Sampling Trace) ■ [Monitor] menu Content Item Read the trace condition and trigger condition set in the PC. Download PC Data Setup Data ・If you click [Setup], trace data of sampling trace, trace condition, and trigger condition is set to the content read from the PC. Traced Data Read sampling trace data saved in the file register of the PC. Sampling Trace Start tracing. ■ [Display] menu Item Content Tool bar Select the display of tool bar (appear/disappear).
PAGE 233
Chapter 8 Monitor (Sampling Trace) ■ [Setup] menu Item Content To set up sampling trace, click [Setup the Trace condition]. The [Setup] dialog box will be displayed. Setup the Trace condition Setup item Content Trace Memory File Select the file register number to save the sampled data. Use file F (2KB) in normal use. Trace Memory Capacity Define the capacity (KB) to use as trace memory from specified file register. The capacity is always 2KB when you use file F.
PAGE 234
Chapter 8 Monitor (Sampling Trace) Item Content Set up communication between the personal computer and the PC. Communication Setup Setup Item Content COM.Port Select the communication port connected to the communication adapter(JW-100SA). Time Out Define the timeout duration of communication. Speed Select the communication speed. ・Communication speed is determined by model. Assign shortcut keys of ladder mnemonics (A contact and B contact) when creating trigger condition.
PAGE 235
Chapter 8 Monitor (Sampling Trace) (2) Tool bar ← When sampling data is displayed ← When trigger condition is displayed (See page) ◎Open Same as [File]-[Open] (8-19) ◎Save Same as [File]-[Save] (8-19) ◎Undo Same as [Edit]-[Undo] (8-19) ◎Execute Sampling Trace Same as [Monitor]-[Sampling Trace] (8-20) ◎Switch to Trigger Condition Window Same as [Edit]-[Trigger Condition] (8-19) ◎Switch to Sampling Condition Window Switch to sampling condition window ◎Displays in Binary Notation Same as [Display
PAGE 236
Chapter 8 Monitor (I/O Forced Processing) 8-4 I/O Forced Processing (Main/Program/System/Data/Parameter：except JW10 model) Turn ON/OFF the rely of the PC by force. If you click [Monitor]-[I/O Forced Processing] of the menu bar of each window, the [I/O Forced Processing] dialog box will be displayed. Editing box (Display example) Execute the force treatment of the relay address that is displayed in the central editing box.
PAGE 237
Chapter 8 Monitor (Edit Program while Monitoring) 8-5 Edit Program while Monitoring (Program) You can edit program of the PC while monitoring. You can modify the part of a program of the PC faster by using this function, it is useful, for example, at the time of debug during the test running.
PAGE 238
Chapter 8 Monitor (Edit Program while Monitoring) [2] Edit Circuit ・You can change, insert (add), delete the program (ladder circuit) of the PC during the ladder monitoring. ● Operation order 1. Activate the [Program：Ladder] window 2. Read program memory from the PC by the [PC Transfer]-[Read] command. You can also write program created at JW-100SP to the program memory of the PC by the [PC Transfer]-[Write] command. 3. Execute ladder monitor by the [Monitor]-[Start Monitoring] command. 4.
PAGE 239
Chapter 8 Monitor (Edit Program while Monitoring) Write the changed circuit to the PC. (same for the button also) Cancel “Edit Circuit” The other commands of the menu bar and the function of the toolbar are same as the [Program： Ladder] window, so refer to “Chapter 5 Menu Operation and Chapter 6 Program Edit.” 7. Change the circuit as same as editing the program by the [Program：Ladder] window. add 8. If you click [File]-[Write In], the dialog box confirming the “writing” will be displayed.
PAGE 240
Chapter 8 Monitor (Edit Program while Monitoring) (2) Insert circuit Create a new circuit, and insert it in the assigned position. (You can create several continuous circuits and insert them in batch.) 5. Select the line number of the circuit that is to be inserted. (The circuit that is to be created will be inserted in front of the selected Line.) 6. Click [Monitor]-[Edit Circuit]-[Insert] ⇒ The [Edit Circuit (Insert)] window will be opened. At this time, the ladder display area is being cleared out.
PAGE 241
Chapter 8 Monitor (Edit Program while Monitoring) 7. Modify the circuit as same as editing the program by the [Program：Ladder] window. 8. If you click [File]-[Write In], the dialog box confirming the “writing” will be displayed. Here, if you click [Yes], the edited circuit will be written in the PC, and it will turn back to the ladder monitor at the [Program：Ladder] window.
PAGE 242
Chapter 8 Monitor (Edit Program while Monitoring) (3) Delete circuit Delete the assigned circuit. (You can modify several continuous circuits in batch.) 5. Select the line number of the circuit that is to be deleted. 6. Click [Monitor]-[Edit Circuit] - [Delete] ⇒ The [Edit Circuit (Delete)] window will be opened, and the selected ladder circuit will be displayed. Menu Bar Main Toolbar Message Bar Status Bar Delete the assigned circuit to the PC.
PAGE 243
Chapter 8 Monitor (Edit Program while Monitoring) 7. If you click [File]-[Write In], the dialog box confirming the“deleting”will be displayed. Here, if you click [Yes], the edited circuit will be deleted from the PC, and it will turn back to the ladder monitor at the [Program：Ladder] window.
PAGE 244
Chapter 9 Print (Page Setup) Chapter 9 Print Print the content of the active window. To print, you operate [Page Setup]/[Print]/[Print Preview]/[Print Setup] of the [File] menu.
PAGE 245
Chapter 9 Print (Page Setup) ● Outline of "Print Setup" ・Print title ・Print program /system, etc. Header Window （program, etc.
PAGE 246
Chapter 9 Print (Page Setup) 9-1 Page Setup (Program/System/Data/Symbol/Parameter/Option Parameter/Data List) Setup the format of the page for printing. If you click [Page Setup] by the [File] (page 9-1) menu of each window, the dialog box of each setup will be displayed. ：Ladder [1] Setup Page of Program： If you click [Page Setup] by the [File] menu of [Program : Ladder] window, the [Ladder Print] dialog box will be displayed.
PAGE 247
Chapter 9 Print (Page Setup) ● [Select File] dialog box (Display example) ・Select the file name of title, header and footer. The operation method is same as "■ Open." Also the file for title/header/footer is created by clicking [Boot HF Editor] (number ② of the previous page) (⇒Refer to "9-2 HF Editor" ) If you click [OK] (number 3 of the previous page) after setting up each item of the [Print Ladder] dialog box, the setup content will be registered.
PAGE 248
Chapter 9 Print (Page Setup) ：Mnemonic [2] Setup Page of Program： If you click [Page Setup] by the [File] menu (page 9-1) of program：mnemonic, the [Print Mnemonic] dialog box will be displayed. ③ ① ② Setup items Content Title If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header.
PAGE 249
Chapter 9 Print (Page Setup) [3] Setup Page of System If you click [Page Setup] by the [File] menu (page 9-1) of the system, the [System Print Setup] dialog box will be displayed. ③ ① ② Setup items Title Content If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header. Assign the file name if you select "Attach.
PAGE 250
Chapter 9 Print (Page Setup) [4] Setup Page of Data If you click [Page Setup] by the [File] menu (page 9-1) of data, the [Data Print setup] dialog box will be displayed. ③ ① ② Setup items Content If you want to print the title, select "Attach," and if you don't want to print the title, Title select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header. Assign the file name if you select "Attach.
PAGE 251
Chapter 9 Print (Page Setup) [5] Setup Page of Symbol If you click [Page Setup] by the [File] menu (page 9-1) of symbol, the [Symbol Print Setup] dialog box will be displayed. ③ ① ② Setup items Title Content If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header. Assign the file name if you select "Attach.
PAGE 252
Chapter 9 Print (Page Setup) [6] Setup Page of Parameter If you click [Page Setup] by the [File] menu (page 9-1) of the parameter , the [Parameter Print Setup] dialog box will be displayed. ③ ① ② Setup items Title Content If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select"Attach/None" (as explained above) in printing the header.
PAGE 253
Chapter 9 Print (Page Setup) [7] Setup Page of Option Parameter If you click [Page Setup] in the [File] menu (page 9-1) of the option parameter, the [Print Setup] dialog box will be displayed. ③ ① ② Setup items Title Content If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header.
PAGE 254
Chapter 9 Print (Page Setup) [8] Setup Page of Data List If you click [Page Setup] by the [File] menu (page 9-1) of data list, the [Dat List Print Setup] dialog box will be displayed. ③ ① ② Setup items Title Content If you want to print the title, select "Attach," and if you don't want to print the title, select "None." Assign the file name if you select "Attach." ※ Header For each page, select "Attach/None" (as explained above) in printing the header. Assign the file name if you select "Attach.
PAGE 255
Chapter 9 Print (HF Editor) 9-2 HF Editor (Program/System/Data/Symbol/Parameter/Other Parameters) "HF Editor," that edits title/header/footer which are used at the time of printing at the page setup ([File] menu) of each window, is explained. If you click [Boot HF Editor] by the "setup page dialog box"(pages 9-3 to 11), the [HF Edit] window will be displayed.
PAGE 256
Chapter 9 Print (HF Editor) (1) [File] menu Item Content New Create a new file. Open Open the existing file. ・The file extension of the HF Editor is "HFD." Save Save the operating file. ・Save without modifying the name /saved place. Save As Save the operating file with a new name. ・If it was saved without the extension, the "HFD" extension will automatically be added. ・You can save by modifying the name /saved place. Setup the format of the page for printing by the [Page Setup] dialog box.
PAGE 257
Chapter 9 Print (HF Editor) (2) [Edit] menu Item Content Cut Cut the selected area and saves it. Copy Copy the selected area and saves it. Paste Paste the saved data. (3) [View] menu Item Content Zoom (＋) Enlarge the display. Zoom (−) Contract the display. Toolbar Select "yes /no" of the display of the main toolbar. Drawing Toolbar Select "yes /no" of the display of the drawing toolbar. Status Bar Select "yes /no" of the display of the status bar.
PAGE 258
Chapter 9 Print (HF Editor) (4) [Select] menu [Assign font] Assign the character font such as the character line, date and model name in the text box at the [Font] dialog box which is displayed by double clicking inside each box (quadrangle). Here, you can assign the font name, style, and size. Item content Horizontal Line If you drag the mouse after clicking the [Horizontal Line], the horizontal line will be drawn.
PAGE 259
Chapter 9 Print (HF Editor) [Change Object] If you click [Change Object] of the [Select] menu after selecting the object(vertical line /date, for example), the dialog box displayed below will be displayed, and the attribute of the object can be modified. ●[Change Object] dialog box (when selecting horizontal line/vertical line/box/text/model name/ address/network No./memory capacity) Content Item Line Assign yes /no (outer line) of the line, kind, and weigh.
PAGE 260
Chapter 9 Print (HF Editor) (5) [Setup] menu Item Content Setup the space between the grids by 0.1 mm module. ・The setup is executed at the [Grid Size Setting] dialog box which is displayed by clicking [Grid Size]. Grid Size (6) [Window] menu Display example Item Overlap Display Content Display several windows in pile. Cascade Display Display several windows in line. Arrange Icons Arrange windows that are iconized at the below part of the [HF Edit] window.
PAGE 261
Chapter 9 Print (Print Setup) 9-3 Print Setup (Main/Program/System/Data/Symbol/Parameter/Option Parameter/Data List/ Sampling Trace) Setup selection/connection of the printer. If you click [Printer Setup] of each [File] menu, the [Printer Setup] dialog box will be displayed.
PAGE 262
Chapter 9 Print (Print Setup) ● [Print Setup] dialog box (Display example) Setup item Content Printer Select the printer from the list of selection box. Paper Select the paper size and the paper-supplying method from the list of selection box. Orientation Setup either portrait or land scape. ・If you click [OK] after setting up each item, the setup content will be registered.
PAGE 263
Chapter 9 Print (Print Preview) 9-4 Print Preview (Program/System/Data/Symbol/Parameter/Option Parameter/Data List/ Sampling Trace) Display the active window as if printing. If you click [Print Preview] of each [File] menu, the [Print Preview] window will be displayed.
PAGE 264
Chapter 9 Print (Print Preview) ● [Print Preview] window Menu bar of the print preview (Display example of data) ・At the [Print Preview] window, there are options such as "move between pages", "enlarge / contract display," and every printing operations. ⇒ Refer to the next page. ● Menu bar of print preview 1 2 Operation item 3 4 5 6 7 Content Enlarge/contract display If you click [Zoom In](5), the preview image is shown large; if you click [Zoom Out](6), the preview image is shown small.
PAGE 265
Chapter 9 Print (Print) 9-5 Print (Program/System/Data/Symbol/Parameter/Option Parameter/Data List /Sampling Trace) Print the content of the active window which was formatted by the setup (page 9-3 and after) at the [Page Setup] of the [File] menu. If you click [Print] of each [File] menu, the [Print] dialog box will be displayed.
PAGE 266
Chapter 9 Print (Print) ● [Print] dialog box (Display example) ・If you click [OK] after setting up the printer (Properties)/Print range/Number of Copies, the starts the printing.
PAGE 267
Chapter 9 Print (Print) The printing examples of program : ladder, program : mnemonic, data, sampling trace are described below.
PAGE 268
Chapter 9 Print (Print) (2) Printing example of program：mnemonic [Header：Attach (Printing Position：Top Left), Symbol：Attach, Comment：Attach] 9・25
PAGE 269
Chapter 9 Print (Print) (3) Printing example of data [Unit to print：Byte, Print format：Hex, Symbol/Comment：None] [Unit to print：Byte, Print format：Binary, Symbol/Comment：None] [Unit to print：Byte, Print format：Hex, Symbol/Comment：Attach] 9・26
PAGE 270
Chapter 9 Print (Print) (4) Printing example of sampling trace (Screen display) Trigger Mode: Start when the condition is satisfied, Trace Memory File F: 2KB, Sampling Frequency: Every Scanning, Zoom: 100%, Display in Hex Notation, Cursor Position: 123 9・27
PAGE 271
SHARP MANUFACTURING SYSTEMS CORPORATION ♦Information about Sharp programmable controller is available at our internet homepage http://sharp-world.com/sms/ 3.1v 9.2001 Printed in Japan (0.1O.Y.