User guide

Acquiring 3D Images

6–2 ACQUIRING 3D IMAGES

4. Position the 3D head rest or 3D bite block making sure that it clicks fully into place.

5. Press and hold to adjust the unit to the estimated height of the patient.

6. Press and hold to adjust the chin rest according to the desired exam type

using the chinrest base positioning indicators as a guide. The Figure below

shows the height that the chinrest base must be positioned before the patient

enters the unit:

1* Lowest position of the chinrest base for 3D Ear & TMJs

2 Approximate position for 3D upper jaw

3 Exact position for 2D sinus (panoramic)

4 Approximate position for 3D lower jaw

5 ** Highest position of the chinrest base as well as the exact position

for 2D panoramic

IMPORTANT

The higher the chinrest base, the lower the area of interest.