User guide

Control Panel
2–6 CS 9300 GENERAL OVERVIEW
Control Panel
The control panel is an alphanumeric, digital soft touch console. It allows the operator to
control certain unit functions. It also displays the operating parameters and error
messages.
Figure 2–5 Unit Control Panel
mem
kV
mA S
76
1 23
5410911
8
1 Height Adjustment button: Adjusts the height of the unit to the height of
the patient.
2 3D Head Adjustment button: Adjusts the patient head to the x-ray beams.
3 3D Adjustment buttons (active in Technical Mode only): Adjusts the
system rotative arm movements.
4 Laser Beam button: Activates the beams to correctly position the patient.
5 Target Position button: Positions the unit rotative arm at the selected
position.
6 Reset button: Resets the unit arm to the initial position to enable the
patient to enter and exit the unit.
7 3D Memorization button (active in Technical Mode only): Memorizes the
3D current positioning parameter settings that override the default
parameters.
8Display Screen: Displays the current acquisition parameters and the error
messages.
9 Ready Indicator LED: Green, indicates the unit is ready for acquisition.
10 X-Ray Emission LED: Yellow, indicates the x-rays are being emitted.
11 System Status LED: Red, indicates the error alerts.