System information

1 Instrument
www.turnerbiosystems.com 6
1.2 Touch Screen Basics
A built-in Windows-based PC with a custom interface enables user-friendly control of the
Modulus™ Microplate Reader. This all-in-one modular instrument saves bench space while
eliminating computer compatibility and maintenance issues.
WARNING: Do not touch the LCD screen with any sharp object, pen, pencil, or
marker as these may cause permanent damage. Avoid spilling any liquid onto
or near the touch screen.
The touch screen is sensitive to the light pressure of a fingertip. It is not necessary to use a
stylus. To select a function, touch the corresponding button once.
To conserve power, sleep mode is activated after 15 minutes without activity or user stimulation
of the touch screen. Lightly touch the LCD screen once to reactivate it.
1.2.1 Buttons and Icons on the INSTRUMENT CONTROL Screen
• HOME screen
• HELP screen
• Opens and closes the instrument door
• Changes to a STOP button when a run is in progress
• Touch the STOP button to cancel a run, if needed
• Selects one of the three screens in the INSTRUMENT
CONTROL screen
• INSTRUMENT STATUS bar (above)
• PLATE icon, visible when a microplate or a Waste Collection Tray
detected inside the instrument
• Icon turns dark when a microplate has been read
• DETECTION MODE icon
• A gray icon indicates which detection modules are installed
• A black icon indicates the active module
• Indicates the instrument is ready to begin a run
• Indicates one or two injectors are installed