Specifications

75
Chapter 4 Usin
g
802.11 Radio
RTS Thresh Packet size above which RTS/CTS is required on link —
 Value: 0 ~ 2347
 Default: 2347 (bytes)
LED N/A
Tray Icon Whether to enable the system tray icon or not —
 Value: On, Off
 Default: On
Hide Passwords Whether to hide the passwords and other sensitive information, such as
WEP keys, in SCU as well as EAP authentication dialog boxes —
 Value: On, Off
 Default: Off
Admin Password N/A
Auth Timeout (s) Specifies how long it will wait for an EAP authentication request to succeed
or fail. If authentication credentials are specified in the active profile and
the authentication times out, then association will fail. If authentication
credentials are not specified in the active profile and the authentication
times out, then the user will be required to enter credentials again.
 Value: 3 ~ 60
 Default: 8 (seconds)
Certs path File path where the certificate for EAP authentication is stored
 Value: A valid directory path of up to 64 characters
 Default: Depends on device
Ping Payload The amount of data to be transmitted on a ping —
 Value: 32, 64, 128, 256, 512, 1024
 Default: 32 (bytes)
Ping Timeout (ms) The amount of time that elapses without a response before ping request is
considered a failure —
 Value: 0~ 30000
 Default: 5000 (milliseconds)
Ping Delay (ms) The amount of time that elapses between successive ping requests —
 Value: 0 ~ 7200000
 Default: 1000 (milliseconds)
Note: SCU stores values in the registry. The purpose of “Custom” is to prevent SCU from
overriding a change to the registry that was made manually. Selecting “Custom”
has no real effect!
(1) If SCU displays a value of “Custom” for a global setting, then the operating
system registry has been edited to include a value that is not available for
selection on the Global window.
(2) If SCU displays a value other than “Custom” and you select the value of
“Custom” and tap [Commit], then SCU reverts to the value that is displayed before
you selected “Custom”.