Specifications

74
9300 Mobile Compu
t
er Reference Manual
 Default: Full
DFS Channels N/A
Aggressive Scan Aggressive scanning complements and works in conjunction with the
standard scanning that is configured through the Roam Trigger, Roam
Delta, and Roam Period settings. It is recommended that aggressive
scanning is enabled unless there is significant co-channel interference
because of overlapping coverage from APs that are on the same channel.
 Value: On, Off
 Default: On
CCX features Whether to allow the use of three CCX features (AP-assisted roaming,
AP-specified maximum transmit power, and radio management) —
 Value: Optimized, Full, Off
 Default: Optimized
WMM Whether to allow the use of Wi-Fi Multimedia Extensions (WME) or not —
 Value: On, Off
 Default: Off
Auth Server Type of authentication server being used for EAP authentication —
 Value:
Type 1 Cisco Secure ACS or another server that
uses PEAPv1 for PEAP with EAP-MSCHAPV2
(PEAP-MSCHAP)
Type 2 A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
 Default: Type 1
TX Diversity How to handle antenna diversity when transmitting data to AP —
 Value:
Main Only Use main antenna only
Aux Only Use auxiliary antenna only
On Use diversity
 Default: On
RX Diversity How to handle antenna diversity when receiving data from AP —
 Value:
Main Only Use main antenna only
Aux Only Use auxiliary antenna only
On-start on Main On startup, use main antenna
On-start on Aux On startup, use auxiliary antenna
 Default: On-start on Main
Frag Thresh If packet size exceeds threshold, then it is fragmented —
 Value: 256 ~ 2346
 Default: 2346 (bytes)