Specifications

9300 Mobile Compu

Reference Manual

CKIP Auto WEP with key generated during EAP authentication, plus Cisco TKIP

and/or Cisco MIC if configured on AP

 Default: None

EAP Type & Credentials

Extensible Authentication Protocol type used for 802.1X authentication to AP

 Value:

None

LEAP Credentials values for LEAP

 User: Username or Domain\Username (up to 64 characters)

 Password (up to 32 characters)

EAP-FAST Credentials values for EAP-FAST

 User: Username or Domain\Username (up to 64 characters)

 Password (up to 32 characters)

 PAC Filename (up to 32 characters)

 PAC Password (up to 32 characters)

PEAP-MSCHAP

PEAP-GTC

EAP-TLS

Credentials values for PEAP-MSCHAP, PEAP-GTC, EAP-TLS

 User: Username or Domain\Username (up to 64 characters)

 Password (up to 32 characters)

 “Validate server” checkbox: Select this if using a CA certificate to

validate an authenticate server. When selected, enter a certificate

filename in the CA Cert field or select the “Use MS store” checkbox.

 CA Cert: Filename of root certificate authority (CA) digital certificate

(up to 32 characters); leave blank if the “Use MS store” checkbox is

selected.

 “Use MS store” checkbox: Select this if the Microsoft certificate store

should be used for a CA certificate. This is applicable only when

“Validate server” is in use.

Additional values for EAP-TLS

 User Cert: Tap the […] button to select a user (or client) certificate

from the Microsoft certificate store. You may not enter a filename

because the user certificate must reside in the Microsoft certificate

store. When you browse for a certificate, the pop-up box shows two

fields, “Issued By” and “Issued to”.

 Priv. key pwd: Password for user certificate (up to 32 characters)

 Default: None for both EAP type and credentials