Specifications

54
9300 Mobile Computer Reference Manual
This is the control of networking over USB cable. It is enabled automatically when
the mobile computer is connected to PC via USB cable.
This is the control of Ethernet module AX88772. It is enabled automatically when
the mobile computer is seated in the Ethernet Cradle.
 When available, the connection status icon will appear on the taskbar.
 When connected, this icon will become .
 When disconnected, this icon will become again.
This is the control of 802.11b/g module for wireless local area networking (WLAN)
connection, which is not available until the power to 802.11b/g module is turned
on through Power Management .
 When available, the connection status icon will appear on the taskbar.
 When connected, this icon will become .
 When disconnected, this icon will become again.
This is the control of Bluetooth module for wireless personal area networking
(WPAN) connection, which is not available until Bluetooth Manager is
executed.
 When available, the connection status icon will appear on the taskbar.
 When connected, this icon will become .
 When disconnected, this icon will become again.
Note: By default, DHCP is enabled for networking. Instead of using DHCP, select
[Properties] and specify a static IP address to the mobile computer. Only change
these settings according to your network administrator's instructions.
Toolbar Items
Description Remarks
Tap this button to open the Connection menu. The
available options depend on the connection you
select.
Tap this button to toggle on/off the connection you
select. The toggle is used for Enable/Disable or
Connect/Disconnect.
Tap this button to delete the connection you select.
Tap this button to view the properties of the
connection you select.
T
ap and hold the icon of a
desired connection type.
T
hen, select an option from
its associated menu.