Specifications

51
Chapter 3 Configurin
g
9300 Mobile Computer
In the [Internet Options] dialog box, you may configure how the mobile computer
connects to the Internet.
Connect an external keyboard to the mobile computer or cradle via the USB host
cable.
In the [Keyboard Properties] dialog box, you may configure settings for character
repeat.
In the [Network and Dial-up Connections] window, you may configure settings for
the mobile computer connects to a network directly or through a modem.
Alternatively, you may tap Start | Settings | Network and Dial-up Connections.
 USB Connection (ActiveSync via USB cable)
 AX88772 (via Ethernet Cradle)
 SDCCF10G1 (via 802.11b/g)
 BTPAN (via Bluetooth)
In the [Owner Properties] dialog box,
 Identification/Notes tab: Type your contact information or notes.
 Network ID tab: Type the user name, password, and domain name used to log
on to the remote network.
In the [Password Properties] dialog box, you may apply password protection at
power-on to limit access to the mobile computer.
In the [PC Connection Properties] dialog box, you may disable the direct connection
between the mobile computer and a desktop computer.
 By default, the mobile computer is allowed to directly connect to a desktop
computer via the USB charging & communication cable. Alternatively, you may
tap Start | Settings | Network and Dial-up Connections and select USB
Connection.
 You may change to use Bluetooth if ActiveSync via Bluetooth has been enabled in
Bluetooth Manager
In the [Power Properties] dialog box,
 Battery tab: You may view the current status of main and backup batteries.
 Schemes tab: You may configure the power scheme and switching.
 Device Status tab: You may view the devices that are consuming power.
In the [Regional and Language Settings] dialog box,
 Region tab: You may customize the appearance and formatting to your
geographic region.
 Language tab: By default, it is set to English (United States).
 Input tab: By default, it is set to English (United States)-US.
In the [Remove Programs] dialog box, you may remove any program that is installed
earlier.