Specifications

127
Appendix II Laser (SE955)
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-E0 Enable
Transmit Check Digit Decide whether to include the UPC-E0 check digit in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E0 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E0 barcode will be expanded into UPC-A, and the
next processing will follow
the settings configured for
UPC-A.
No
UPC-E1 Disable
Transmit Check Digit Decide whether to include the UPC-E1 check digit in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E1 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
No
UCC Coupon Extended Code Disable
Read UPC-A barcodes starting with digit "5", EAN-13 barcodes starting with digits "99", and
UPC-A/GS1-128 Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!
 Use “Addon Redundancy” to control auto-discrimination of the GS1-128 (right half) of a coupon
code.
UPC/EAN Addon ---
Addon 2 / Addon 5 Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with addons.
 Ignore Addons
 Decode Only With Addons
 Auto-discriminate
Ignore…
Addon Redundancy When “Auto-discriminate” is applied, decide the number of
times (2~30)
of supplementary decoding the same
barcode that makes a valid reading.
7 times
UPC/EAN Security Level Level 2
Decide the decode security for UPC/EAN barcodes. Higher security levels are selected for
decreasing levels of barcode quality. Note that increasing security level decreases the scan engine’s
aggressiveness; choose only that level of security necessary for the application.
 Level 0 – Select this option for the scan engine to operate in its most aggressive state,
providing sufficient security in decoding most “in-spec” UPC/EAN barcodes.
 Level 1 – As barcode quality level diminish, certain characters become prone to mis-decodes
before others (i.e. 1, 2, 7, 8). Select this option for the scan engine to eliminate mis-decodes,
which are limited to characters 1, 2, 7 and 8.