Specifications

125
Appendix II Laser (SE955)
Interleaved 25 Enable
Convert to EAN-13 Convert a 14-character barcode into EAN-13 if the
following requirements are met:
 The barcode must have a leading 0 and a valid EAN-13
check digit.
 “Verify Check Digit” must be disabled.
No
Verify Check Digit Decide whether to verify the check digit. If desired, select
one of the algorithms below. If the check digit
is incorrect,
the barcode will not be accepted.
 No
 USS algorithm
 OPCC algorithm
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
No
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
Chinese 25 Enable
Code 39 Enable
Convert to Code 32 Convert to Italian Pharmacode. No
Code 32 Prefix Prefix character "A" to Code 32 barcodes. No
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 "Verify Check Digit" must be enabled.
No
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Trioptic Code 39 Decide whether to decode Trioptic Code 39.
 Trioptic Code 39 is a variant of Code 39 used in the
marking of computer tape cartridges. It always
contains six characters.
Disable
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
Code 93 Enable
Select Length
 One or two fixed lengths
 Range (1~55)
4~55
MSI Enable
Verify Check Digit If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the check digit
is incorrect, the
barcode will not be accepted.
Single Modulo
10