Specifications

5-10
3. Turn on the TV receiver or video device, and then turn on the notebook.
When the setup prompt appears, press F2 to run the Setup utility.
4. In the Advanced page of the Setup utility, set the field Display to TV to NTSC
or PAL.
5. Set the TV receiver to video display mode.
6. From the Windows Start menu, select Settings, and then click on Control
Panel. Double-click on the Display icon and then click on the Display Device
tab.
7. In the Display Device window, check the item marked TV, and check the
item marked NTSC. The system will immediately send the video output to
the TV receiver using a resolution of 640 x 480. If the results are satisfactory,
click on the OK button to close the Display Device window.
8. When you want to return the display to the built-in screen (or an external
monitor), follow the steps above to open the Display Device window and
remove the check from the TV item. Check either the LCD or the CRT item
according to where you want to display the video.
Note: Some interference may occur when small characters are being
displayed on the TV.