Specifications

5-4
5. Use the gap created by sliding the edge latch open to raise the outer edge of
the battery pack out of the battery compartment.
6. You can then remove the battery completely.
7. Install the replacement battery back and ensure that the center and edge
latches are engaged, and the battery is secure.
Using the Parallel Port
Follow the steps below to connect a printer, or other parallel device, to your
notebook.
1. Turn off the notebook and pull down the cover on the back side of the
notebook.
2. Connect the printer cable to the parallel port in the connector compartment.
3. Restart your notebook.
1. If you want to change the parameters of the parallel port, for example, if you
are using a device which supports an Enhanced Parallel Port (EPP) or an
Extended Capabilities Port (ECP), restart your notebook and press F2 to run
the Setup utility. In the Advanced page of the utility, you can change the way
the parallel port operates.
Parallel Port