Specifications

3-16
Resuming from Suspend Mode
To resume from the suspend to RAM mode, press the Space Bar.
To resume from the suspend to disk mode, turn on the notebook. When you
resume from a suspend to disk mode, your notebook will restore to memory the
exact state that your notebook was in when it was suspended.
Caution: Do not touch the keyboard, GlidePoint, mouse, etc., while the
notebook is entering or resuming from the suspend mode, as that may
cause a malfunction. Do not let your notebook enter the suspend mode in
the following conditions:
•
The system is playing or recording audio, photos, etc.
•
The system is operating peripheral devices such as a printer.
Conditions that Prohibit Suspend Modes
Your notebook will not enter suspend mode under the following conditions:
•
The Power setting in Windows 95 is not set to manage power use on this
computer.
•
Windows 95 displays the clock.
•
An application that periodically writes to the screen is running on your
notebook.
•
The item Enable infrared communication on in the Infrared Monitor is
checked. You can see its status by selecting the Options tab of Control Panel -
Infrared Options.
•
The Disk Drives of Power Properties in Windows 95 are checked.
•
The item Disable in this hardware profile in the dialog box of Built-in
infrared port on laptop or desktop Properties is unchecked. You can see its
status by selecting Control Panel - System - Device Manager - Infrared -
Built-in infrared port on laptop or desktop Properties - General.
These are valid conditions for prohibiting the suspend mode. If you feel that your
notebook is not suspending correctly, please check that the conditions noted
above are not the cause.
Making Changes to the Boot Page