Specifications

B-2 Recreating the Suspend-to-Disk Partition
You should prepare the following items:
•
Backup CD-ROM.
•
CD-ROM Setup Boot Disk.
•
Two or more boxes of 1.44 MB diskettes, depending on how much you have used
your hard disk.
Backing up all the data of the hard disk
1. From the Start menu, select Help.
2. Open the topic on Backup.
3. Start Backup from the Help windows.
Deleting the current suspend-to-disk partition
1. Insert the CD-ROM Setup Boot Disk into the floppy disk drive.
2. Reboot the notebook.
3. Press F2 when the message Press <F2> to enter SETUP appears.
4. On the Main page of Setup Utility, set Boot Sequence to A: Then C:.
5. On the Security page, set Fixed disk boot sector to Normal.
6. Press the Esc key and select Save Changes & Exit.
7. When the system restarts, the following message appears:
Do you want to set up Windows 95?
(To change the suspend-to-disk partition, select N.)
[Y/N]
8. Press the N key. A:\ prompt appears.
9. Type PHDISK /DELETE /PARTITION and press Enter.
Deleting the partition that contains current files
Following the above steps,
1. Type FDISK and press Enter.
2. Select 3. Delete partition or Logical DOS Drive and press Enter.
3. Select 1. Delete Primary DOS Partition and press Enter.
4. Press the Enter key, input the volume label and press the Enter key again.
5. Press the Y key and then the Enter key.
6. Press the Esc key twice.
7. Press the Ctrl+Alt+Del keys simultaneously to restart the system.
8. Press the N key.