Datasheet/Datenblatt

Cells polycristalline, 156.75 mm x 156.75 mm, 72 cells in series
Front glass low iron tempered glass, 3.2 mm
Frame anodized aluminium alloy, silver
Connection box IP68, 3 bypass diodes
Cable 4.0 mm², length 1,200 mm
Connector PV-XT101.1, SUZHOU XTONG PHOTOVOLTAIC TECHNOLOGY Co. Ltd
Modules per pallet 30 pcs
Pallet size (L × W × H) 1,995 × 1,150 × 1,123 mm
Pallet weight 740 kg
Packaging dataGeneral data
Electrical data (NOCT)
Electrical data (STC)
Contact Sharp
SHARP ELECTRONICS GMBH
ENERGY SOLUTIONS
NAGELSWEG 33 – 35
20097 HAMBURG
GERMANY
T: +49(0)40/2376-2436
F: +49(0)40/2376-2193
Contact Installer
www.sharp.eu
Empower yourself
Note: Technical data is subject to change without prior notice. Before using Sharp products, please request the latest data sheets from Sharp. Sharp accepts no responsibility for damage to devices which have been equipped with Sharp products on the basis of unverified information.
The specifications may deviate slightly and are not guaranteed. Installation and operating instructions are to be found in the corresponding handbooks, or can be downloaded from www.sharp.eu/solar. This module should not be directly connected to a load.
Length 1,956 mm
Width 992 mm
Depth 35 mm
Weight 22.2 kg
P
max
-0.41 %/°C
V
oc
-0.32 %/°C
I
sc
0.055 %/°C
Mechanical data
Temperature coefcient
Dimensions (mm)
*Please refer to Sharp’s installation manual for details.
Maximum system voltage 1,000 VDC
Over-current protection 15 A
Temperature range -40 to +85° C
Max. mechanical load (snow / wind)* 2,400 Pa
Limit value s
NDAH32_11/17EN
Local responsibility: Benelux SolarInfo.seb@sharp.eu, France SolarInfo.fr@sharp.eu, Germany SolarInfo.de@sharp.eu, Poland energy-info.pl@sharp.eu
Spain & Portugal SolarInfo.es@sharp.eu, United Kingdom SolarInfo.uk@sharp.eu, Other countries SolarInfo.Europe@sharp.eu
992
Drainage Hole
8 – 3.5 × 8mm
Grounding Hole
4 – Ø 5.1mm
A A
1956
1200
80
80
ND-AH325 ND-AH330
Maximum power P
max
325 330 W
p
Open-circuit voltage V
oc
46 46.2 V
Short-circuit current I
sc
9.24 9.33 A
Voltage at point of maximum power V
mpp
37.6 37.8 V
Current at point of maximum power I
mpp
8.64 8.73 A
Module efficiency
m
16.7 17.0 %
STC = Standard Test Conditions: irradiance 1,000 W/m², AM 1.5, cell temperature 25 °C.
Rated electrical characteristics are within ±10 % of the indicated values of Isc, Voc and 0 to +5 % of Pmax (power measurement tolerance ±3 %).
ND-AH325 ND-AH330
Maximum power P
max
240.5 244.3 W
p
Open-circuit voltage V
oc
42.6 42.7 V
Short-circuit current I
sc
7.47 7.54 A
Voltage at point of maximum power V
mpp
34.6 34.7 V
Current at point of maximum power I
mpp
6.96 7.03 A
Module operating temperature at 800 W/m² irradiance, air temperature of 20 °C, wind speed of 1 m/s. NOCT = 45°C.
11.5
A-A
35
35