User's Manual Part 1

Basic Operations
1-10
1
*
1
Including Video CD and Photo CD.
*
2
To play a disk that is created by a commercial DVD authoring software or recorded by a
commercial DVD recorder, it must have been finalized by the authoring software or recorder.
*
3
The computer supports non-cartridge disks or Type2/Type4 removable cartridge disks. Before
inserting a removable disk, remove the cartridge from the disk.
• The Sharp Systems website at http://www.sharpsystems.com may
provide a list of recommended media.
• To play back the created disk, be sure to use a compatible computer or
device.
Handling Disks
• Do not write on either side of the disk, particularly the non-label side. Data is read
from/written onto the non-label side. Do not mark this surface.
• Keep your disks away from direct sunlight, heat and excessive moisture.
• Always hold the disks by the edges. Fingerprints, dirt or water on the disks can
cause noise or mistracking. If a disk is dirty or does not play properly, clean it with
a soft, dry cloth, wiping straight out from the center, along the radius.
Inserting Disks
1. Make sure the optical drive indicator light is not on; then press the eject button.
The drive tray will pop out.
Optical Drive Indicator
Eject Button
Optical Drive