User Manual

16-164
Connecting to a PC
Connecting to a PC
You can use your handset with other digital equipment
using USB ports or the Bluetooth wireless technology
port. For a PC, an optional PC Link Kit (CE-UC32) and the
following system environment is required.
PC Hardware
Intel
®
-Pentium
®
266MHz or faster
64MB of available RAM or above
60MB of available hard-disk space or above
CD-ROM drive
USB 1.1 or Bluetooth interface
Operating System
Microsoft
®
Windows
®
98+Service Pack 1/98 Second
Edition/ME/2000+Service Pack 4/XP+Service Pack 1
GSM/GPRS Modem
The GSM/GPRS modem in your handset enables digital
equipment to access the Internet. Connect your handset
to your PC through USB or Bluetooth interface.
Handset Manager
“Handset Manager” is the software that enables you to
manage the communication between the handset and a
PC. Using this software, you can control the transmission
of pictures, sounds, music, video clips and “Contacts list”
entries.
Installing Software
The USB cable is necessary for installing the software.
1 Insert the CD-ROM supplied with PC Link Kit into
the PC’s CD-ROM drive.
The CD-ROM screen appears.
If the CD-ROM screen does not appear,
double-click [Launcher.exe] in your CD-ROM.
2 Follow the on-screen instructions to complete
the installation of the three programs in order.
For information on software support, refer to the following
site:
http://www.sharp-mobile.com/tm/
Modem communication is not possible while
communicating with the Handset Manager via
USB or Bluetooth interface.
For Windows 2000 Professional and Windows
XP, install/uninstall programs after logging on
as the Administrator.
Connect the handset to the USB cable by
following the on-screen instructions.
It is not recommended that you make or answer
calls when using the handset as a GSM/GPRS
modem, as the operation may be interrupted.
e_tm200_7fm.book Page 164 Tuesday, November 9, 2004 9:14 PM