User Manual

15-142
Setting the Handset
Setting Any Key Answer
You can set the any key answer function so that you can
answer a call by pressing any key except
F or A [Busy].
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
set and press C [Options] → “Personalise.”
2 Press a or b to highlight “Any key answer” and
press B.
3 Press a or b to highlight “On” or “Off” and
press B.
Setting the Automatic Answer
The automatic answer function allows you to answer calls
automatically when the handset is connected to Bluetooth
headset. You can select the desired time until your
handset answers.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → “In car” and press C
[Options] → “Personalise.”
2 Press a or b to highlight “Automatic answer”
and press B.
3 Press a or b to highlight “On” or “Off” and
press B.
If you select “On,” select the time span (5, 10, 15, 20
sec) before the handset automatically connects the call.
Resetting the Profiles Setting
You can reset all the profiles settings that you have set to
the default settings.
To cancel the settings, you need to set the handset code
beforehand or refer to page 15-154 for details.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
reset and press C [Options] → “Set to default.”
2 Enter your handset code and press B.
3 Press C [Yes].
To cancel, press A [No] in this step.
For information on “Bluetooth,” refer to “Setting
Bluetooth Connection” on page 15-150.
If you enter a wrong handset code in step 2, the
operation is cancelled.
e_tm200_7fm.book Page 142 Tuesday, November 9, 2004 9:14 PM