User Manual

15-137
Setting the Handset
3 Press a or b to select the volume level from
one of five levels, “Step tone” or “Silent” and
press B.
Setting a Melody as the Ringtone
You can select preset data for use as ringtones, sound
effects, melodies, etc. You can also select data in
“Sounds” or “Music” for the default ringtone excluding the
ones in AMR/WAVE format.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
set and press C [Options] → “Personalise.”
2 Press a or b to highlight “Assign melody” and
press B.
3 Press a or b to highlight “My sounds,” “My
Music” or “T-Mobile” and press B.
The files in “T-Mobile” are preset data.
4 Press a or b to highlight the ringtone you wish
to set.
If you wish to listen to the ringtone you selected,
press
B.
To stop, press
C [Stop].
5 Press C [Select].
Setting the Vibration
You can set the vibration for incoming calls regardless of
the ringer volume and tone settings.
1 At the main menu, select in the following order:
“Settings” → “Profiles” → the profile you wish to
set and press C [Options] → “Personalise.”
2 Press a or b to highlight “Vibration” and press
B.
3 Press a or b to highlight “Enable,” “Disable” or
“Link to sound” and press B.
You cannot set melodies for the “T-Mobile”
profile.
You cannot choose sound files in the memory
card for ringtones.
When “Link to sound” is selected in step 3,
melodies are synchronised with the vibration
for the ringtone. However, this function may not
work depending on the melody.
When you select “Enable” or “Link to sound” in
step 3, “ ” is displayed on the standby
screen.
e_tm200_7fm.book Page 137 Tuesday, November 9, 2004 9:14 PM