User Manual

6-29
Basic Handset Operations
Useful Functions
Speed Dialling
Up to 9 phone numbers from the “Contacts list” memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys. For information
on the “Speed dial list,” refer to “Setting the Speed Dial
List” on page 9-60.
1 To dial a number using the speed dial, press and
hold for approximately 2 seconds any of the digit
keys. (H to O and Q. G cannot be used as
the speed dial because it is already assigned to
the “Voice mail.”)
The phone number stored in the “Speed dial list” is
dialled.
Call Waiting
This service enables you to talk to a third party while you
are in the middle of another call. After activating this
service, a beep tone notifies you of the second call.
To activate this service, refer to “Activating the Call
Waiting Service” on page 15-128.
1 During a call, press C [Options].
The “Options” menu appears.
2 Press a or b to highlight “Hold & Answer” and
press B.
The second party is put on hold and you can talk to
the third party.
3 Press C [Options].
The “Options” menu appears.
4 Press a or b to highlight “Swap calls” and
press B.
You can switch between the two calls.
5 Press C [Options].
The “Options” menu appears.
6 Press a or b to highlight “Release call” and
press B.
You are ending the current call to return to the held
call.
The call waiting service may not be available
on all networks. Contact your service provider
for more information.
If you do not wish to answer the second call,
press
A [Reject], or press C [Options] and
press
a or b to highlight “Busy” or “Reject,”
then press
B in step 2. If “Reject” is selected,
the call log of the second call is saved as a
missed call.
6-30
Basic Handset Operations
Accessing the Text message Menu
During a Call
1 During a call, press C [Options].
The “Options” screen appears.
2 Press a or b to highlight “Text message” and
press B.
3 Press a or b to highlight one of following
options.
When selecting “Create Message”:
allows you to make a Text message.
When selecting “Inbox,” “Sent,” or “Drafts”:
allows you to access these folders. For more
information on Text message, refer to “Using the
Message Service” on page 11-65.
Conference Call
This service enables you to call more than 2 people at the
same time. You can talk with 5 participants at most with
this service. To make a conference call, you must have
one active call and one held call.
1 With one active call and one held call, press C
[Options].
The “Options” menu appears.
2 Press a or b to highlight “Multiparty” and press
B.
3 Press a or b to highlight “Conference all” and
press B to initiate the conference call.
You can talk with all the people on the line.
4 Press F to end the conference call.
The conference call ends.
To add new participants to the conference call
1 During the call, press C [Options] and select
“Dial.”
2 Enter the phone number you wish to include in
the conference call.
3 Press D.
After the call is connected, continue from the step 1
of “Conference Call.”
If you wish to include other participants in the
conference call, perform the same process again.
To put all the participants on hold
1 During the call, press C [Options] and select in
the following order : “Multiparty” “Conference
all.”
2 Press a or b to highlight “Conference Hold all”
and press B.