User Manual

11-66
Using the Message Service
4 Press a or b to highlight “Create message”
and press B.
5 Enter the phone number or E-mail address of the
person you wish to send the message to and
press B.
If you are sending an SMS message:
you can only enter a phone number.
If you are sending an MMS message:
you can enter either a phone number or an E-mail
address.
If you are sending an E-mail message:
you can only enter an E-mail address.
If you wish to select a phone number from the
“Contacts list,” search for the phone number. For
information on how to search “Contact list” entries,
refer to “Searching a Name and Number in the
Contacts List” on page 9-52.
6 Enter your message.
For information on how to enter text, refer to
“Entering Text” on page 8-45.
7 When you have finished writing the message,
press B.
Using the Text Templates
For information on how to create text templates, refer to
“Making Text Templates” on page 11-78.
1 At the main menu, select in the following order:
“Messages” → select “SMS,” “MMS,” or “E-mail”
→ “Create message.”
Enter the phone number or E-mail address and
press
B.
2 Press a, b, c, or d to move the cursor to the
point you wish to insert the text template, and
press C [Options].
3 Press a or b to highlight “Text template” and
press B.
4 Press a or b to highlight the template you wish
to enter from the list and press B. Go back to
step 6 of “Making Messages (page 11-65).”
You can check the message length at the top right
side of the message screen to figure out how
many more characters you can enter.
When sending an SMS message of more than 160
characters, a confirmation message appears.
Press
C [Yes] to send or A [No] to cancel.