User Manual

6-27
Basic Handset Operations
Basic Handset Operations
This section describes basic phone call functions.
Confirm that the handset is on.
Making a Call
1 Slide open the handset and enter a phone
number with the keypad.
When entering a number, start with the area code.
2 Confirm the number and press D.
Start talking when the connection is established.
If you enter a wrong number
Press A [Clear] to delete one digit. Press A [Clear]
and hold for approximately 2 seconds to delete all digits
and return to standby mode.
Ending a Call
Press F to end the call.
The estimated total time for the call appears.
Answering a Call
1 The handset rings and the Indicator LED flashes
for an incoming call.
2 Press D, B or C [Answer].
The call is connected and “ ” appears.
When the Any Key Answer Function
is Activated
When the “Any Key Answer” function is on, you can
answer the call by pressing any key except
F, A, c
or
d. For information on “Any Key Answer,” refer to
“Setting Any Key Answer” on page 15-133.
When the Hands Free Kit is
Connected
When the Hands Free Kit is Connected, press the button
of the hands free EARphone & MIC as illustrated to
answer a call.
Sliding close the handset also ends a call.